Overview
The CSD88599Q5DC 60V power block, produced by Texas Instruments, is a highly optimized component designed for high-current motor control applications. It is particularly suited for handheld, cordless garden and power tools. This power block utilizes TI's latest generation silicon, optimized for low resistance to minimize conduction losses and offer excellent thermal performance. The device is integrated into a single 5mm × 6mm package with a DualCool exposed metal case, allowing for efficient heat dissipation and a reduced power stage footprint by up to 50%.
Key Specifications
| Parameter | Value | Unit |
|---|---|---|
| Voltage Rating | 60 | V |
| Continuous Drain Current at Ta=25°C | 40 | A |
| Operating Temperature Range | -55 to 150 | °C |
| Junction-to-case thermal resistance (top of package) | 2.1 | °C/W |
| Junction-to-case thermal resistance (VIN pin) | 1.1 | °C/W |
| Gate charge at Vth | 6.3 | nC |
| Package Type | DualCool exposed metal case | |
| Package Dimensions | 5mm × 6mm |
Key Features
- Optimized for high-current motor control applications, especially in handheld, cordless garden and power tools.
- Utilizes TI's latest generation silicon for low resistance and minimal conduction losses.
- Excellent thermal performance with a DualCool exposed metal case, allowing for efficient heat dissipation.
- Vertically integrated half-bridge design in a single package, reducing the power stage footprint by up to 50%.
- Supports trapezoidal commutation control for brushless DC motors, offering simpler and more efficient switching compared to sinusoidal control.
- Ability to operate up to 10-cell Li-Ion battery voltage applications (30V to 42V) and up to 54V with RC snubbers.
- Thermal vias and external heatsink options for enhanced thermal management.
Applications
- Handheld, cordless garden and power tools.
- High-current DC motor control in various power tools and gardening equipment.
- Brushless DC motor (BLDC) applications requiring trapezoidal commutation control.
Q & A
- What is the voltage rating of the CSD88599Q5DC power block?
The voltage rating of the CSD88599Q5DC power block is 60V.
- What is the continuous drain current of the CSD88599Q5DC at 25°C?
The continuous drain current at 25°C is 40A.
- What is the operating temperature range of the CSD88599Q5DC?
The operating temperature range is -55°C to 150°C.
- How does the DualCool package enhance thermal performance?
The DualCool package allows for efficient heat dissipation by utilizing the PCB copper planes and enabling the application of an external heatsink on top of the package.
- What type of commutation control does the CSD88599Q5DC support for BLDC motors?
The CSD88599Q5DC supports trapezoidal commutation control for BLDC motors.
- What are the recommended components for reducing switch-node ringing?
Recommended components include high-side gate resistors, RC snubbers, and proper PCB layout to minimize parasitic inductances.
- How can the thermal performance be optimized in the PCB design?
Optimization can be achieved through the use of thermal vias, external heatsinks, and careful PCB layout to minimize solder voids and ensure good thermal conductivity.
- What is the significance of Hall effect sensors in BLDC motor control using the CSD88599Q5DC?
Hall effect sensors are crucial for detecting the rotor position relative to the stator coils, enabling the microcontroller to determine the proper commutation sequence.
- How can the safe operating area (SOA) be determined for the CSD88599Q5DC?
The SOA can be determined by using the SOA curve, which outlines the temperature boundaries and power loss limits for safe operation. This involves considering the case and board temperatures and adjusting the current limits accordingly.
- What are the packaging options available for the CSD88599Q5DC?
The packaging options include Tape & Reel (TR) and Cut Tape (CT).
