Overview
The BSP762TNT is a smart high-side power switch manufactured by Infineon Technologies. This integrated circuit is designed to provide reliable and efficient power distribution in various automotive and industrial applications. The device is packaged in an 8-pin DSOP (Dual Small Outline Package) and is part of Infineon's portfolio of power management ICs.
Key Specifications
| Parameter | Symbol | Values | Unit |
|---|---|---|---|
| Operating Junction Temperature | Tj | -40 to 150 | °C |
| Supply Voltage | Vbb | 4.5 to 40 | V |
| Output Current | Iout | up to 1.5 | A |
| On-State Resistance | Ron | typically 150 | mΩ |
| Package Type | 8-pin DSOP |
Key Features
- High-Side Switch: The BSP762TNT acts as a high-side switch, allowing it to control the power supply to loads connected between the switch and ground.
- Overtemperature Protection: The device includes overtemperature protection to prevent damage from excessive heat.
- Short-Circuit Protection: It features short-circuit protection to safeguard against load faults.
- Low On-State Resistance: With a typical on-state resistance of 150 mΩ, the switch minimizes power losses during operation.
- Diagnostic Feedback: The device provides diagnostic feedback to indicate fault conditions such as overtemperature or short-circuit.
Applications
- Automotive Systems: The BSP762TNT is suitable for various automotive applications, including power distribution in body control modules, lighting systems, and other vehicle subsystems.
- Industrial Control Systems: It can be used in industrial control systems for managing power to motors, valves, and other loads.
- Consumer Electronics: The device can also be applied in consumer electronics for power management in devices such as printers, scanners, and other peripherals.
Q & A
- What is the BSP762TNT?
The BSP762TNT is a smart high-side power switch manufactured by Infineon Technologies.
- What is the package type of the BSP762TNT?
The BSP762TNT is packaged in an 8-pin DSOP (Dual Small Outline Package).
- What is the operating junction temperature range of the BSP762TNT?
The operating junction temperature range is -40 to 150°C.
- What is the maximum output current of the BSP762TNT?
The maximum output current is up to 1.5 A.
- Does the BSP762TNT have overtemperature protection?
Yes, the device includes overtemperature protection.
- What are some common applications of the BSP762TNT?
Common applications include automotive systems, industrial control systems, and consumer electronics.
- What is the typical on-state resistance of the BSP762TNT?
The typical on-state resistance is 150 mΩ.
- Does the BSP762TNT provide diagnostic feedback?
Yes, the device provides diagnostic feedback to indicate fault conditions.
- What is the supply voltage range for the BSP762TNT?
The supply voltage range is 4.5 to 40 V.
- Is the BSP762TNT protected against short-circuits?
Yes, the device features short-circuit protection.
