Overview
The TLE6208-6G, also referred to as TLE62086GXUMA1, is a fully protected Hex-Half-Bridge-Driver designed by Infineon Technologies. This component is specifically tailored for automotive and industrial motion control applications. It leverages Infineon's Smart Power Technology (SPT®), which integrates bipolar and CMOS control circuitry with DMOS power devices on a single monolithic circuit. This design allows for flexible and efficient control of various loads, including DC motors.
Key Specifications
| Specification | Value |
|---|---|
| Number of Drivers | Six High-Side and Six Low-Side Drivers |
| Current per Switch | 0.6 A continuous, 1 A peak |
| RDS ON | Typ. 0.8Ω @ 25°C per switch |
| Protection Features | Over- and Undervoltage-Lockout, Overtemperature-Protection with hysteresis and diagnosis, Temperature prewarning |
| Interface | Standard SPI-Interface |
| Stand-by Mode Current | Typ. 10μA @ 25°C |
| Package | PG-DSO-28-24 |
| Compliance | RoHS compliant, AEC Qualified |
Key Features
- Free configuration as switch, halfbridge, or H-bridge
- Optimized for DC motor management applications
- Outputs fully short circuit protected with diagnosis
- CMOS/TTL compatible inputs with hysteresis
- Internal clamp diodes
- Enhanced power P-DSO-Package
- Detailed diagnosis via SPI
- Very low quiescent current in stand-by mode
Applications
- Flap motor control in Heating & Ventilation Systems
- DC brush motor control
- Motor control for automotive and industrial applications
Q & A
- What is the TLE6208-6G used for? The TLE6208-6G is used for automotive and industrial motion control applications, particularly for controlling DC motors.
- How many drivers does the TLE6208-6G have? It has six high-side and six low-side drivers.
- What is the maximum current per switch? The maximum current per switch is 0.6 A continuous and 1 A peak.
- What protection features does the TLE6208-6G have? It includes over- and undervoltage-lockout, overtemperature-protection with hysteresis and diagnosis, and temperature prewarning.
- What interface does the TLE6208-6G use? It uses a standard SPI-Interface.
- How much current does it consume in stand-by mode? It consumes a typical 10μA at 25°C in stand-by mode.
- Is the TLE6208-6G RoHS compliant? Yes, it is RoHS compliant and AEC Qualified.
- What kind of motors can it control? It can control DC brush motors and is optimized for DC motor management applications.
- Can the outputs be configured freely? Yes, the outputs can be freely configured as switch, halfbridge, or H-bridge.
- What is the package type of the TLE6208-6G? It comes in a PG-DSO-28-24 package.
