Overview
The TLE6208-6G is a fully protected Hex-Half-Bridge Driver designed by Infineon Technologies, specifically for automotive and industrial motion control applications. This component is based on Infineon's Smart Power Technology (SPT) which integrates bipolar and CMOS control circuitry with DMOS power devices on the same monolithic circuitry. The device features six high-side and six low-side drivers that are freely configurable, allowing for various load combinations and control modes such as switch, half-bridge, or H-bridge configurations.
Key Specifications
| Parameter | Symbol | Min | Typ | Max | Unit | Note or Test Condition |
|---|---|---|---|---|---|---|
| Supply Voltage | VS | 8 | - | 40 | V | - |
| Logic Supply Voltage | VCC | 4.75 | - | 5.25 | V | - |
| Continuous Output Current per Switch | IOUT1-6 | - | 0.6 | - | A | - |
| Peak Output Current per Switch | IOUT1-6 | - | 1 | - | A | tP < 50 ms; t = 1 s |
| On-Resistance per Switch | RDS ON | - | 0.8 | - | Ω | @ 25 °C |
| Junction Temperature | Tj | -40 | - | 150 | °C | - |
| Stand-by Current | - | - | 10 | - | μA | @ 25 °C, Inhibit mode |
Key Features
- Six high-side and six low-side drivers, freely configurable as switch, half-bridge, or H-bridge.
- Optimized for DC motor management applications.
- Outputs fully short circuit protected with diagnosis.
- Overtemperature protection with hysteresis and diagnosis.
- Temperature prewarning.
- Standard SPI-Interface for control.
- Very low current consumption in stand-by (Inhibit) mode.
- Over- and undervoltage lockout.
- CMOS/TTL compatible inputs with hysteresis.
- Internal clamp diodes.
- Enhanced power P-DSO package.
- Green Product (RoHS compliant) and AEC Qualified.
Applications
The TLE6208-6G is designed for various automotive and industrial motion control applications, including:
- DC motor control: Up to 5 actuators (DC motors) can be connected in a cascade configuration.
- Automotive systems: Suitable for use in automotive environments due to its robust protection features and compliance with automotive standards.
- Industrial automation: Used in industrial motion control systems requiring high reliability and performance.
Q & A
- What is the TLE6208-6G used for?
The TLE6208-6G is used for automotive and industrial motion control applications, particularly for DC motor management.
- How many drivers does the TLE6208-6G have?
The TLE6208-6G has six high-side and six low-side drivers.
- What are the configurable modes of the TLE6208-6G?
The drivers can be freely configured as switch, half-bridge, or H-bridge.
- What is the continuous output current per switch?
The continuous output current per switch is 0.6 A, with a peak current of 1 A.
- What protection features does the TLE6208-6G have?
The device features overtemperature protection, short circuit protection, over- and undervoltage lockout, and temperature prewarning.
- How is the TLE6208-6G controlled?
The device is controlled via a standard SPI-Interface.
- What is the typical stand-by current of the TLE6208-6G?
The typical stand-by current is 10 μA at 25 °C.
- Is the TLE6208-6G RoHS compliant?
Yes, the TLE6208-6G is RoHS compliant and AEC Qualified.
- What is the junction temperature range of the TLE6208-6G?
The junction temperature range is -40 °C to 150 °C.
- Can the TLE6208-6G be used in life-support devices?
No, the TLE6208-6G should not be used in life-support devices or systems without the express written approval of Infineon Technologies.
