Overview
The AP0101AT2L00XPGA0-TR, produced by onsemi, is a high-performance image signal processor (ISP) designed specifically for automotive applications. This component is part of a two-chip solution that integrates with onsemi's megapixel high dynamic range (HDR) sensors, such as the AR0132AT. It is optimized for use in Automotive Digital Surround View Systems, offering exceptional flexibility, performance, and design reusability. The AP0101AT2L00XPGA0-TR enables the creation of high-quality camera systems with fast time to market and reduced heat generation, thanks to the separate co-processor chip.
Key Specifications
| Parameter | Value |
|---|---|
| Manufacturer Part # | AP0101AT2L00XPGA0-TR |
| Package/Case | VFBGA-81 |
| MSL Type | 3 |
| MSL Temp (°C) | 260 |
| Container Type | REEL |
| Container Qty. | 3000 |
| Frame Rate (fps) | 45 fps at 1.2Mp, 60 fps at 720p |
| Video Resolution | Up to 1280x960 (1.2Mp), 720p |
| Output Format | YUV422 8-bit, 10-bit, and SMPTE296M 10-12 bit tone-mapped Bayer |
| Compatible Sensors | AR0132AT |
| Supply Voltage | VDDIO_S: 1.8 or 2.8V, VDDIO_H: 1.8, 2.5, or 3.3V, VDD_REG: 1.8V, VDDIO_OTPM: 2.5 or 3.3V |
| Operating Temperature (ambient - TA) | -40°C to +105°C |
| Power Consumption | 128.8 mW |
Key Features
- High-Speed Data Transfer
- Low Latency Processing
- Rapid Error Correction
- Efficient Resource Utilization
- Up to 1.2Mp (1280x960) Aptina sensor support
- Color and gamma correction
- Auto exposure, auto white balance, 50/60 Hz flicker avoidance
- Adaptive Local Tone Mapping (ALTM)
- Test Pattern Generator
- Two-wire serial programming interface (Slave)
- Interface to low-cost Flash or EPROM through SPI bus
- High-level host command interface
- Standalone operation supported
- Up to 5 GPIO
- Fail-safe IO
- Multi-Camera synchronization support
- Dual Band IR filter support
Applications
- Automotive Digital Surround View Systems
- Surround, rear, and front view cameras
- Blind spot / side mirror replacement cameras
- Automotive viewing/processing fusion cameras
Q & A
- What is the AP0101AT2L00XPGA0-TR used for?
The AP0101AT2L00XPGA0-TR is used in automotive applications, particularly for Automotive Digital Surround View Systems, and works with high dynamic range (HDR) sensors like the AR0132AT.
- What is the package type of the AP0101AT2L00XPGA0-TR?
The package type is VFBGA-81.
- What are the supported frame rates?
The component supports up to 45 fps at 1.2Mp and 60 fps at 720p.
- What are the compatible sensors for this ISP?
The AP0101AT2L00XPGA0-TR is compatible with sensors like the AR0132AT.
- What are the key features of this image signal processor?
Key features include high-speed data transfer, low latency processing, rapid error correction, and efficient resource utilization, among others.
- What is the operating temperature range of the AP0101AT2L00XPGA0-TR?
The operating temperature range is -40°C to +105°C.
- How much power does the AP0101AT2L00XPGA0-TR consume?
The power consumption is approximately 128.8 mW.
- What interfaces does the AP0101AT2L00XPGA0-TR support?
The component supports a two-wire serial programming interface, SPI bus for Flash or EPROM, and a high-level host command interface.
- Can the AP0101AT2L00XPGA0-TR operate standalone?
- What applications benefit from using the AP0101AT2L00XPGA0-TR?
Applications include Automotive Digital Surround View Systems, surround, rear, and front view cameras, and blind spot/side mirror replacement cameras.
