Overview
The TXS0104EQPWRQ1 is a quadruple bidirectional voltage-level translator manufactured by Texas Instruments. This component is designed to facilitate communication between different voltage domains in electronic systems, making it an essential tool for various applications, including embedded systems, IoT devices, consumer electronics, and industrial automation. The device operates without the need for direction-control signals, simplifying interface design and reducing component count. It is qualified for automotive applications and meets the AEC-Q100 standards, ensuring reliability and performance across a wide range of temperatures and operating conditions.
Key Specifications
| Specification | Value |
|---|---|
| Operating Voltage Range | 1.2V to 3.6V |
| Translation Voltage Range | 1.2V to 3.6V |
| Number of Channels | 4 |
| Output Current per Channel | 50 mA |
| Propagation Delay | 3 ns |
| Operating Temperature Range | -40°C to +125°C |
| Package Type | TSSOP (14-pin) |
| Supply Voltage for Side A (VCCA) | 1.65 V to 3.6 V |
| Supply Voltage for Side B (VCCB) | 2.3 V to 5.5 V |
| Output Types | Open Drain, Push-Pull |
| ESD Protection | ±10-kV Air-Gap Discharge |
Key Features
- Bidirectional Voltage Translation: Allows seamless communication between different voltage domains without the need for direction-control signals.
- No Direction-Control Signals Required: Simplifies the interface design and reduces component count.
- Low Propagation Delay: Ensures fast data transmission with minimal signal degradation (3 ns propagation delay).
- Low Power Consumption: Optimized for low power operation, making it suitable for portable and battery-powered devices.
- ESD Protection: Built-in protection against electrostatic discharge to enhance reliability.
Applications
- Embedded Systems: Facilitates communication between devices operating at different voltage levels in microcontroller-based applications.
- IoT Devices: Enables data exchange between sensors, microcontrollers, and communication modules with varying voltage requirements.
- Consumer Electronics: Used in products such as smartphones, tablets, and gaming consoles to bridge voltage gaps in data communication interfaces.
- Industrial Automation: Ensures seamless communication between sensors, actuators, and PLCs operating at different voltage levels.
- Automotive Applications: Qualified for automotive infotainment, advanced driver assistance systems (ADAS), and other automotive applications.
Q & A
- What is the main function of the TXS0104EQPWRQ1? The TXS0104EQPWRQ1 is a quadruple bidirectional voltage-level translator designed to translate signal levels between different voltage domains in electronic systems.[
- What are the key features of the TXS0104EQPWRQ1? Key features include bidirectional voltage translation, no direction-control signals required, low propagation delay, low power consumption, and ESD protection.[
- What is the operating temperature range of the TXS0104EQPWRQ1? The operating temperature range is -40°C to +125°C.[
- What types of outputs does the TXS0104EQPWRQ1 support? The device supports both open-drain and push-pull output types.[
- Is the TXS0104EQPWRQ1 suitable for automotive applications? Yes, it is qualified for automotive applications and meets the AEC-Q100 standards.[
- What is the maximum data rate for the TXS0104EQPWRQ1? The maximum data rate is 24 Mbps for push-pull outputs and 2 Mbps for open-drain outputs.[
- How many channels does the TXS0104EQPWRQ1 have? The device has 4 channels.[
- What is the package type of the TXS0104EQPWRQ1? The device is available in a 14-pin TSSOP package.[
- Does the TXS0104EQPWRQ1 require direction-control signals? No, it does not require direction-control signals, simplifying the interface design.[
- What kind of ESD protection does the TXS0104EQPWRQ1 have? The device has ±10-kV Air-Gap Discharge ESD protection.[
