Overview
The NBSG86ABAEVB is an evaluation board designed for the NBSG86A SiGe Differential Smart Gate, a multi-function logic gate produced by ON Semiconductor. This board is intended to facilitate the evaluation and testing of the NBSG86A device, which can be configured as an AND/NAND, OR/NOR, XOR/XNOR, or 2:1 MUX. The evaluation board provides a high-bandwidth, 50 Ω controlled impedance environment, ensuring optimal performance for high-frequency applications up to 20 GHz.
Key Specifications
| Parameter | Description |
|---|---|
| Device Type | SiGe Differential Smart Gate |
| Operating Voltage | VCC = 2.0 V, VEE = -1.3 V or -0.5 V, VTT = GND |
| Output Amplitude | Programmable between 0 and 800 mV in five discrete steps |
| Frequency Range | Up to 20 GHz |
| Impedance | 50 Ω controlled impedance environment |
| Board Material | Rogers 6002 (5.0 mil) and copper plating (32 mil) |
| Package Type | 4x4 mm FCBGA/16 |
Key Features
- Configurable as AND/NAND, OR/NOR, XOR/XNOR, or 2:1 MUX logic functions.
- Programmable output amplitude between 0 and 800 mV in five discrete steps using the OLS input.
- High-bandwidth, 50 Ω controlled impedance environment for optimal high-frequency performance.
- Supports both differential and single-ended modes of operation.
- Designed for frequencies up to 20 GHz with optimal SMA connector launch and minimal insertion loss.
Applications
The NBSG86A SiGe Differential Smart Gate and its evaluation board are suitable for various high-frequency applications, including:
- High-speed data transmission systems.
- Telecommunication equipment.
- Radar and microwave systems.
- High-performance computing and networking infrastructure.
Q & A
- What is the primary purpose of the NBSG86ABAEVB evaluation board?
The primary purpose is to evaluate and test the NBSG86A SiGe Differential Smart Gate device.
- What are the configurable logic functions of the NBSG86A device?
The device can be configured as AND/NAND, OR/NOR, XOR/XNOR, or 2:1 MUX.
- What is the range of programmable output amplitude for the NBSG86A device?
The output amplitude can be programmed between 0 and 800 mV in five discrete steps.
- What is the operating voltage range for the NBSG86A device?
VCC = 2.0 V, VEE = -1.3 V or -0.5 V, VTT = GND.
- What is the maximum frequency range supported by the evaluation board?
The board supports frequencies up to 20 GHz.
- What materials are used in the construction of the evaluation board?
The board uses Rogers 6002 material (5.0 mil) and copper plating (32 mil).
- What type of impedance environment does the evaluation board provide?
A 50 Ω controlled impedance environment.
- Can the NBSG86A device operate in both differential and single-ended modes?
- What equipment is typically needed for setting up the evaluation board?
Power supply with 2 outputs, oscilloscope, differential signal generator, matched high-speed cables with SMA connectors, and power supply cables with clips.
- Where can additional information about the NBSG86A device and evaluation board be found?
Additional information can be found on the ON Semiconductor website.
