Overview
The FNA41560T2 is an Intelligent Power Module (IPM) from onsemi, designed for motion control applications. It provides a fully-featured, high-performance inverter output stage suitable for AC Induction, BLDC (Brushless DC), and PMSM (Permanent Magnet Synchronous Motor) motors. This module integrates optimized gate drive for the built-in IGBTs to minimize EMI and losses, and includes multiple on-module protection features such as under-voltage lockouts, over-current shutdown, thermal monitoring of the drive IC, and fault reporting. The built-in high-speed HVIC requires only a single supply voltage and translates incoming logic-level gate inputs to the high-voltage, high-current drive signals needed to drive the internal IGBTs.
Key Specifications
| Parameter | Conditions | Rating | Unit |
|---|---|---|---|
| VPN Supply Voltage | Applied between P - NU, NV, NW | 450 | V |
| VPN(Surge) Supply Voltage (Surge) | Applied between P - NU, NV, NW | 500 | V |
| VCES Collector - Emitter Voltage | 600 | V | |
| IC Each IGBT Collector Current | TC = 25°C, TJ < 150°C | 15 | A |
| ICP Each IGBT Collector Current (Peak) | TC = 25°C, TJ < 150°C, Under 1 ms Pulse Width | 30 | A |
| VCE(SAT) Collector - Emitter Saturation Voltage | VDD = VBS = 15 V, VIN = 5 V, IC = 15 A, TJ = 25°C | 1.60 - 2.20 | V |
| tON Switching Times | VPN = 300 V, VDD = VBS = 15 V, IC = 15 A, TJ = 25°C, VIN = 0 V ↔ 5 V, Inductive Load | 0.40 - 1.30 | μs |
Key Features
- UL Certified No. E209204 (UL1557)
- 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate Drives and Protection
- Low Thermal Resistance Using Ceramic Substrate
- Low-Loss, Short-Circuit-Rated IGBTs
- Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
- Built-In NTC Thermistor for Temperature Monitoring
- Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
- Single-Grounded Power Supply
- Isolation Rating of 2000 Vrms / 1 min
- Pb-Free and Halogen Free/BFR Free Device
Applications
The FNA41560T2 is primarily used in motion control applications, including:
- Motion Control - Home Appliance / Industrial Motor
Q & A
- What is the FNA41560T2 used for? The FNA41560T2 is used for motion control applications, providing a high-performance inverter output stage for AC Induction, BLDC, and PMSM motors.
- What are the key protection features of the FNA41560T2? The module includes under-voltage lockouts, over-current shutdown, thermal monitoring of the drive IC, and fault reporting.
- What is the voltage and current rating of the FNA41560T2? The module is rated for 600 V and 15 A.
- Does the FNA41560T2 have built-in temperature monitoring? Yes, it includes a built-in NTC thermistor for temperature monitoring.
- Is the FNA41560T2 Pb-Free and Halogen Free? Yes, it is a Pb-Free and Halogen Free/BFR Free device.
- What is the isolation rating of the FNA41560T2? The isolation rating is 2000 Vrms / 1 min.
- What type of substrate is used in the FNA41560T2? It uses a ceramic substrate.
- Does the FNA41560T2 support single-grounded power supply? Yes, it supports a single-grounded power supply.
- What are the switching times for the FNA41560T2? The switching times are 0.40 - 1.30 μs under specified conditions.
- Is the FNA41560T2 UL certified? Yes, it is UL certified with No. E209204 (UL1557).
- What is the recommended mounting torque for the FNA41560T2? The recommended mounting torque is 0.7 N/m.
