Overview
The AP0202AT2L00XPGA0-DR, produced by onsemi, is a High-Dynamic Range (HDR) Image Signal Processor (ISP) designed for advanced automotive camera systems. This ISP supports up to 2.0 megapixel (1920x1080) ON Semiconductor sensors and is optimized for high-performance image processing. It offers various features such as color and gamma correction, auto exposure, auto white balance, and adaptive local tone mapping, making it ideal for automotive viewing and processing applications.
Key Specifications
| Parameter | Value |
|---|---|
| Image Sensor Interfaces | Parallel and HiSPi |
| Input Data Format | Parallel: 12-bit SDR (linear) or 12-bit HDR companded. HiSPI: 12-bit SDR (linear) or 12/14-bit HDR companded |
| Output Interface | Up to 24-bit parallel |
| Output Format | RGB888, RGB565, YUV422 8-/10-bit |
| Maximum Resolution | 1920 x 1080 (2.0 Mp) |
| Input Clock Range | 10 - 29 MHz |
| Output Pixel Clock Maximum | 125 MHz |
| Supply Voltage | VDDIO_S: 1.8 or 2.8 V nominal, VDDIO_H: 1.8 or 2.8 or 3.3 V nominal, VDD_REG: 1.8 V nominal, VDD: 1.2 V nominal, VDD_PLL: 1.2 V nominal, VDD_PHY: 2.8 V nominal, VDDIO_OTPM: 2.5 to 3.3 V nominal |
| Operating Temperature (Ambient) | –40°C to +105°C |
| Power Consumption | 250 mW |
Key Features
- Support for up to 2.0 megapixel (1920x1080) ON Semiconductor sensors
- Frame rates: 30 fps at 1080p, 45 fps at 1.2 Mp, 60 fps at 720p
- Color and gamma correction
- Auto exposure, auto white balance, 50/60 Hz auto flicker detection and avoidance
- Adaptive Local Tone Mapping (ALTM)
- Two-wire serial programming interface (CCIS)
- Parallel output
- Configurable through low-cost SPI Flash and EEPROM devices
- High-level host command interface
- Standalone operation supported
- Up to 7 GPIO and fail-safe IO
- Multi-Camera synchronization support
Applications
- Surround, rear, and front view cameras
- Blind spot / side mirror replacement cameras
- Automotive viewing/processing fusion cameras
Q & A
- What is the maximum resolution supported by the AP0202AT ISP?
The AP0202AT supports up to 2.0 megapixel (1920x1080) resolution. - What are the frame rates supported by the AP0202AT?
The AP0202AT supports frame rates of 30 fps at 1080p, 45 fps at 1.2 Mp, and 60 fps at 720p. - What types of image sensor interfaces does the AP0202AT support?
The AP0202AT supports parallel and HiSPi image sensor interfaces. - What output formats are available on the AP0202AT?
The output formats include RGB888, RGB565, and YUV422 8-/10-bit. - What is the operating temperature range of the AP0202AT?
The operating temperature range is –40°C to +105°C. - How much power does the AP0202AT consume?
The power consumption is 250 mW. - Does the AP0202AT support multi-camera synchronization?
Yes, the AP0202AT supports multi-camera synchronization. - What are some typical applications of the AP0202AT?
Typical applications include surround, rear, and front view cameras, blind spot/side mirror replacement cameras, and automotive viewing/processing fusion cameras. - Can the AP0202AT operate standalone?
Yes, the AP0202AT can operate in standalone mode. - How is the AP0202AT configured?
The AP0202AT can be configured through low-cost SPI Flash and EEPROM devices and has a high-level host command interface.
