Overview
The TFP410MPAPREP is a PanelBus™ digital transmitter produced by Texas Instruments. It is part of a comprehensive family of end-to-end digital visual interface (DVI) 1.0-compliant solutions, primarily targeted at the PC and consumer electronics industry. This component provides a universal interface that allows for a glueless connection to most commonly available graphics controllers, supporting various bus widths, adjustable signal levels, and both differential and single-ended clocking modes.
Key Specifications
| Parameter | Value |
|---|---|
| Package | 64-Pin Thin Quad Flat Pack (TQFP) - HTQFP (PAP) |
| Operating Temperature Range | -55°C to 125°C |
| Supply Voltage | Single 3.3-V Supply Operation |
| Pixel Rates | Up to 165 MHz (including 1080p and WUXGA at 60Hz) |
| Input Modes | 12-Bit Dual-Edge and 24-Bit Single-Edge |
| Input Signal Levels | Adjustable 1.1-V to 1.8-V and Standard 3.3-V CMOS |
| Clocking Modes | Fully Differential and Single-Ended |
| Interface Compatibility | DVI 1.0 Compliant, Intel 12-Bit Digital Video Port Compatible |
| PLL Noise Immunity | Enhanced PLL Noise Immunity |
| Power and Ground | On-Chip Regulators and Bypass Capacitors |
| Jitter Performance | No HSYNC Jitter Anomaly, Negligible Data-Dependent Jitter |
| Programming Interface | Programmable Using I2C Serial Interface |
| Monitor Detection | Monitor Detection Through Hot-Plug and Receiver Detection |
Key Features
- Universal Graphics Controller Interface with selectable bus widths and adjustable signal levels
- Supports pixel rates up to 165 MHz, including 1080p and WUXGA at 60Hz
- 12-Bit Dual-Edge and 24-Bit Single-Edge Input Modes
- Fully Differential and Single-Ended Input Clocking Modes
- DVI 1.0 Compliant and compatible with Intel 12-Bit Digital Video Port
- Enhanced PLL Noise Immunity and negligible data-dependent jitter
- On-Chip Regulators and Bypass Capacitors for reducing system costs
- Programmable Using I2C Serial Interface
- Monitor Detection Through Hot-Plug and Receiver Detection
- Single 3.3-V Supply Operation and 64-Pin Thin Quad Flat Pack (TQFP) Using TI’s PowerPAD™ Package
Applications
The TFP410MPAPREP is designed for use in digital host monitor systems, particularly in the PC and consumer electronics industry. It is suitable for applications requiring high-speed digital interfaces, such as:
- Flat Panel Displays (FPDs)
- Digital Monitors and Projectors
- Consumer Electronics Devices
- PC Graphics Systems
Q & A
- What is the TFP410MPAPREP?
The TFP410MPAPREP is a PanelBus™ digital transmitter produced by Texas Instruments, designed for DVI 1.0-compliant applications.
- What are the key features of the TFP410MPAPREP?
Key features include universal graphics controller interface, support for high pixel rates, differential and single-ended clocking, DVI 1.0 compliance, and enhanced PLL noise immunity.
- What are the operating temperature ranges for the TFP410MPAPREP?
The operating temperature range is -55°C to 125°C.
- What supply voltage does the TFP410MPAPREP require?
The component operates on a single 3.3-V supply.
- How is the TFP410MPAPREP programmed?
The TFP410MPAPREP can be programmed using an I2C serial interface.
- What types of input modes does the TFP410MPAPREP support?
The component supports 12-Bit Dual-Edge and 24-Bit Single-Edge input modes.
- Is the TFP410MPAPREP compatible with Intel digital video ports?
Yes, it is compatible with Intel 12-Bit Digital Video Port.
- What is the maximum pixel rate supported by the TFP410MPAPREP?
The maximum pixel rate supported is up to 165 MHz, including 1080p and WUXGA at 60Hz.
- How does the TFP410MPAPREP handle monitor detection?
Monitor detection is achieved through hot-plug and receiver detection.
- What package type does the TFP410MPAPREP use?
The component uses a 64-Pin Thin Quad Flat Pack (TQFP) with TI’s PowerPAD™ Package.
