Overview
The STGIPN3H60T-H is a Small Low-Loss Intelligent Molded Module (SLLIMM) nano IPM (Intelligent Power Module) produced by STMicroelectronics. This module is designed to provide a compact, high-performance AC motor drive solution in a simple and rugged design. It integrates six IGBTs and three half-bridge HVICs for gate driving, along with freewheeling diodes, to ensure low electromagnetic interference (EMI) and optimized switching speed. The module is optimized for thermal performance and compactness, making it suitable for built-in motor applications or other low-power applications where space is limited.
Key Specifications
| Parameter | Value | Unit |
|---|---|---|
| Collector-Emitter Voltage (VCES) | 600 | V |
| Continuous Collector Current (IC) | 3 | A |
| Pulsed Collector Current (ICP) | 18 | A |
| Total Power Dissipation (PTOT) | 9.7 | W |
| Low Voltage Power Supply (VCC) | 13.5 - 18 | V |
| Bootstrap Voltage (VBOOT) | 13 - 18 | V |
| Junction Temperature Range (TJ) | -40 to 150 | °C |
| Case Temperature Range (TC) | -40 to 125 | °C |
| Isolation Withstand Voltage (VISO) | 1000 | Vrms |
| Thermal Resistance Junction-Case (Rth(j-c)) | 12.8 | °C/W |
| Thermal Resistance Junction-Ambient (RthJA) | 22 | °C/W |
Key Features
- 3 A, 600 V, 3-phase IGBT inverter bridge including control ICs for gate driving and freewheeling diodes.
- Optimized for low electromagnetic interference (EMI).
- VCE(sat) with negative temperature coefficient.
- 3.3 V, 5 V, 15 V CMOS/TTL input comparators with hysteresis and pull-down/pull-up resistors.
- Undervoltage lockout and internal bootstrap diode.
- Interlocking function and shutdown function.
- Comparator for fault protection against overtemperature and overcurrent.
- Op-amp for advanced current sensing.
- Optimized pinout for easy board layout.
- NTC for temperature control.
Applications
- 3-phase inverters for motor drives.
- Dish washers.
- Refrigerator compressors.
- Air-conditioning fans.
- Draining and recirculation pumps.
Q & A
- What is the maximum collector-emitter voltage of the STGIPN3H60T-H?
The maximum collector-emitter voltage (VCES) is 600 V.
- What is the continuous collector current rating of the module?
The continuous collector current (IC) is 3 A.
- What is the thermal resistance junction-case for a single IGBT?
The thermal resistance junction-case (Rth(j-c)) is 12.8 °C/W.
- What are the typical applications of the STGIPN3H60T-H?
Typical applications include 3-phase inverters for motor drives, dish washers, refrigerator compressors, air-conditioning fans, and draining and recirculation pumps.
- Does the module have built-in protection features?
Yes, it includes a comparator for fault protection against overtemperature and overcurrent, as well as undervoltage lockout and shutdown functions.
- What is the junction temperature range of the module?
The junction temperature range (TJ) is -40 to 150 °C.
- How is the module optimized for thermal performance?
The module is optimized for thermal performance and compactness, with a design that enhances heat dissipation and minimizes thermal resistance.
- What type of input comparators does the module use?
The module uses 3.3 V, 5 V, 15 V CMOS/TTL input comparators with hysteresis and pull-down/pull-up resistors.
- Does the module include an operational amplifier?
Yes, it includes an operational amplifier for advanced current sensing.
- How should the input signals be managed to avoid oscillation?
The input signals should have short wiring, and the use of RC filters with a time constant of about 100 ns is recommended to avoid input signal oscillation.
