Overview
The AP0101AT2L00XPGA0-DR, produced by onsemi, is a dedicated automotive image signal processor (ISP) designed to work in conjunction with high-performance megapixel high dynamic range (HDR) sensors. This component is part of a two-chip solution that includes the sensor and the co-processor, allowing for multiple camera configurations, reduced heat generation, and enhanced sensor performance. It is particularly suited for Automotive Digital Surround View Systems and works seamlessly with ON Semiconductor's AR0132AT HDR automotive sensor.
Key Specifications
| Parameter | Value |
|---|---|
| Primary Camera Interface | Parallel |
| Primary Camera Input Format | RAW12 Linear/Companded Bayer data |
| Output Interface | Up to 16-bit Parallel |
| Output Format | YUV422 8-bit, 10-bit, and SMPTE296M 10-12 bit tone-mapped Bayer |
| Maximum Resolution | 1280x960 (1.2Mp) |
| Input Clock Range | 6-30 MHz |
| Maximum Frame Rate | 45 fps at 1.2Mp, 60 fps at 720p |
| Maximum Output Clock Frequency | Parallel clock up to 84 MHz |
| Supply Voltage | VDDIO_S: 1.8 or 2.8V nominal, VDDIO_H: 1.8, 2.5, or 3.3V nominal, VDD_REG: 1.8V nominal, VDDIO_OTPM: 2.5 or 3.3V nominal |
| Operating Temperature (Ambient - TA) | -40°C to +105°C |
| Power Consumption | 128.8 mW |
| Package Type | 81-ball VFBGA |
Key Features
- High Dynamic Range (HDR) support
- Up to 1.2Mp (1280x960) Aptina sensor support
- Frame rates of up to 45 fps at 1.2Mp and 60 fps at 720p
- Color and gamma correction
- Auto exposure and auto white balance
- 50/60 Hz flicker avoidance
- Adaptive Local Tone Mapping (ALTM)
- Test Pattern Generator
- Two-wire serial programming interface (Slave)
- Interface to low-cost Flash or EPROM through SPI bus
- High-level host command interface
- Standalone operation supported
- Up to 5 GPIO and fail-safe IO
- Multi-Camera synchronization support
- Dual Band IR filter support
Applications
- Automotive Digital Surround View Systems
- Surround, rear, and front view cameras
- Blind spot / side mirror replacement cameras
- Automotive viewing/processing fusion cameras
Q & A
- What is the primary function of the AP0101AT2L00XPGA0-DR?
The AP0101AT2L00XPGA0-DR is a dedicated automotive image signal processor designed to work with high dynamic range (HDR) sensors, enhancing camera performance in automotive applications.
- Which sensor does the AP0101AT2L00XPGA0-DR typically work with?
The AP0101AT2L00XPGA0-DR is designed to work with ON Semiconductor's AR0132AT HDR automotive sensor.
- What are the maximum frame rates supported by the AP0101AT2L00XPGA0-DR?
The component supports frame rates of up to 45 fps at 1.2Mp and 60 fps at 720p.
- What is the maximum resolution supported by the AP0101AT2L00XPGA0-DR?
The maximum resolution supported is 1280x960 (1.2Mp).
- What are the key features of the AP0101AT2L00XPGA0-DR in terms of image processing?
Key features include high dynamic range support, color and gamma correction, auto exposure, auto white balance, and adaptive local tone mapping.
- What types of automotive cameras can the AP0101AT2L00XPGA0-DR be used in?
The component can be used in surround, rear, and front view cameras, as well as blind spot and side mirror replacement cameras.
- What is the operating temperature range of the AP0101AT2L00XPGA0-DR?
The operating temperature range is -40°C to +105°C.
- What is the power consumption of the AP0101AT2L00XPGA0-DR?
The power consumption is approximately 128.8 mW.
- What package type does the AP0101AT2L00XPGA0-DR come in?
The component comes in an 81-ball VFBGA package.
- Does the AP0101AT2L00XPGA0-DR support multi-camera synchronization?
Yes, it supports multi-camera synchronization.
