Overview
The AMIS-30660CANH2RG is a Controller Area Network (CAN) transceiver produced by onsemi. This component serves as the interface between a CAN protocol controller and the physical bus, making it suitable for use in both 12 V and 24 V systems. It provides differential transmit capability to the bus and differential receive capability to the CAN controller, ensuring robust communication in various environments.
Key Specifications
| Specification | Value |
|---|---|
| Supply Voltage (Min) | 4.75 V |
| Supply Voltage (Max) | 5.25 V |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +125°C |
| Data Transmission Standard | CAN |
| Data Rate | Up to 1 Mb/s |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Package Type | SOIC-8 |
Key Features
- Fully compatible with the ISO 11898-2 standard
- Certified Authentication on CAN Transceiver Conformance (d1.1)
- High speed (up to 1 Mb/s)
- Ideally suited for 12V and 24V industrial and automotive applications
- Low EME common-mode choke is no longer required
- Differential receiver with wide common-mode range (+/- 35V) for high EMS
- No disturbance of the bus lines with an un-powered node
- Transmit data (TxD) dominant time-out function
- Thermal protection
- Bus pins protected against transients in an automotive environment
- Silent mode in which the transmitter is disabled
- Short circuit proof to supply voltage and ground
Applications
- Automobiles
- Industrial Equipment
- ECU (Engine Control Unit)
- Gateway
- Body Controller
Q & A
- What is the primary function of the AMIS-30660CANH2RG?
The AMIS-30660CANH2RG serves as the interface between a CAN protocol controller and the physical bus.
- What are the supported supply voltage ranges for the AMIS-30660CANH2RG?
The supported supply voltage ranges are from 4.75 V to 5.25 V.
- What is the maximum data rate supported by the AMIS-30660CANH2RG?
The maximum data rate supported is up to 1 Mb/s.
- Is the AMIS-30660CANH2RG compatible with ISO standards?
Yes, it is fully compatible with the ISO 11898-2 standard.
- What are the typical applications of the AMIS-30660CANH2RG?
Typical applications include automobiles, industrial equipment, ECU, gateway, and body controller.
- Does the AMIS-30660CANH2RG require a common-mode choke for low EME?
No, a common-mode choke is no longer required for low EME.
- What is the operating temperature range of the AMIS-30660CANH2RG?
The operating temperature range is from -40°C to +125°C.
- Does the AMIS-30660CANH2RG have thermal protection?
Yes, it includes thermal protection.
- Is the AMIS-30660CANH2RG protected against transients in an automotive environment?
Yes, the bus pins are protected against transients in an automotive environment.
- Can the transmitter be disabled on the AMIS-30660CANH2RG?
Yes, it has a silent mode in which the transmitter is disabled.
