Overview
The SPC5634MF2MLQ80R is a 32-bit microcontroller from NXP USA Inc., part of the MPC563xM family. This microcontroller is designed to provide enhanced powertrain functionality, making it suitable for entry-level automotive and industrial applications. It features the e200z3 core, which is part of the Power Architecture family, and is known for its high performance and reliability in demanding environments.
Key Specifications
| Specification | Details |
|---|---|
| Core Processor | e200z3 |
| Core Size | 32-Bit Single-Core |
| Speed | 80 MHz |
| Flash Memory | Up to 1.5 MB |
| Operating Temperature | -40°C to 150°C |
| Package Type | 144-Pin LQFP |
| Supply Voltage | 5.0 V ± 5% (4.5 V to 5.25 V) with internal regulator for 3.3 V and 1.2 V |
| Power Dissipation | Less than 400 mW (nominal) |
Key Features
- Fully static operation with a frequency range of 0 MHz to 80 MHz and 2% frequency modulation up to 82 MHz.
- Low power design with dynamic power management of core and peripherals, software-controlled clock gating, and low power stop mode.
- On-chip flash memory up to 1.5 MB accessed via a 64-bit wide bus interface, with a 16 KB shadow block and fetch accelerator.
- System integration unit (SIU) with centralized GPIO control of 80 I/O pins, pin function selection, configurable weak pull-up or pull-down, drive strength, slew rate, and hysteresis.
- Error correction status module (ECSM) with configurable error-correcting codes (ECC) reporting and single-bit error correction reporting.
- Frequency Modulating Phase-locked loop (FMPLL) with reference clock pre-divider, reduced frequency divider, and system clock divider.
Applications
The SPC5634MF2MLQ80R microcontroller is primarily used in automotive and industrial applications, including engine management, powertrain control, and other high-reliability systems. Its robust design and wide operating temperature range make it suitable for demanding environments such as those found in automotive ADAS (Advanced Driver Assistance Systems) and industrial control systems.
Q & A
- What is the core processor of the SPC5634MF2MLQ80R microcontroller?
The core processor is the e200z3, which is part of the Power Architecture family. - What is the maximum operating speed of the SPC5634MF2MLQ80R?
The maximum operating speed is 80 MHz. - How much flash memory does the SPC5634MF2MLQ80R have?
The microcontroller has up to 1.5 MB of flash memory. - What is the operating temperature range of the SPC5634MF2MLQ80R?
The operating temperature range is -40°C to 150°C. - What type of package does the SPC5634MF2MLQ80R come in?
The microcontroller comes in a 144-Pin LQFP package. - What are the key features of the SPC5634MF2MLQ80R's power management?
The key features include dynamic power management of core and peripherals, software-controlled clock gating, and low power stop mode. - Does the SPC5634MF2MLQ80R support error correction?
Yes, it supports configurable error-correcting codes (ECC) and single-bit error correction reporting. - What are some of the primary applications of the SPC5634MF2MLQ80R?
The primary applications include automotive engine management, powertrain control, and industrial control systems. - Is the SPC5634MF2MLQ80R RoHS compliant?
Yes, the SPC5634MF2MLQ80R is RoHS compliant. - What is the typical power dissipation of the SPC5634MF2MLQ80R?
The typical power dissipation is less than 400 mW (nominal).
