Overview
The SPC5633MF2MLQ60R is a 32-bit microcontroller from NXP USA Inc., part of the Qorivva MPC56xx family. This microcontroller is designed with the Power Architecture core and is particularly suited for automotive and industrial applications. It features a single-core architecture operating at a frequency of up to 60 MHz and includes 1 MB of flash memory. The device is known for its robust performance, low power consumption, and advanced peripheral set, making it an ideal choice for demanding embedded systems.
Key Specifications
| Parameter | Value |
|---|---|
| Core Architecture | Power Architecture, e200z3 core |
| Operating Frequency | Up to 60 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Package Type | 144-LQFP (20x20 mm) |
| Operating Temperature Range | -40°C to 125°C |
| Power Supply | Single power supply with 5.0 V ±10% (4.5 V to 5.25 V) |
| Internal Logic Voltage | 1.2 V |
| Power Dissipation | Less than 400 mW (nominal) |
Key Features
- Advanced Peripherals: Includes enhanced modular I/O system (eMIOS), second-generation enhanced time processor unit (eTPU2), and error correction status module (ECSM).
- Low Power Design: Features dynamic power management of core and peripherals, software-controlled clock gating, and low power stop mode.
- System Integration Unit (SIU): Centralized GPIO control of 80 I/O pins, pin function selection, configurable weak pull-up or pull-down, drive strength, slew rate, and hysteresis.
- Flash Memory: Up to 1 MB flash memory accessed via a 64-bit wide bus interface, with a 16 KB shadow block and fetch accelerator.
- Timer and Motor Control Capabilities: eMIOS with 16 timer channels, 24-bit timer resolution, and motor control capability. eTPU2 with 32 channels, 24-bit timer resolution, and angle clock hardware support.
Applications
- Automotive Systems: Suitable for engine control units, transmission control units, and other automotive applications requiring high performance and reliability.
- Industrial Control Systems: Used in industrial automation, motor control, and other industrial applications where robust performance and low power consumption are critical).
- Embedded Systems: Ideal for various embedded system applications that require advanced peripherals and low power design).
Q & A
- What is the core architecture of the SPC5633MF2MLQ60R microcontroller?
The SPC5633MF2MLQ60R microcontroller is based on the Power Architecture, specifically the e200z3 core).
- What is the maximum operating frequency of the SPC5633MF2MLQ60R?
The maximum operating frequency is up to 60 MHz).
- How much flash memory does the SPC5633MF2MLQ60R have?
The SPC5633MF2MLQ60R has 1 MB of flash memory).
- What is the package type of the SPC5633MF2MLQ60R?
The package type is 144-LQFP (20x20 mm)).
- What is the operating temperature range of the SPC5633MF2MLQ60R?
The operating temperature range is -40°C to 125°C).
- What are the key features of the eMIOS in the SPC5633MF2MLQ60R?
The eMIOS features include 16 timer channels, 24-bit timer resolution, and motor control capability).
- What is the purpose of the eTPU2 in the SPC5633MF2MLQ60R?
The eTPU2 is an intelligent co-processor designed for timing control, with 32 channels, 24-bit timer resolution, and angle clock hardware support).
- How does the SPC5633MF2MLQ60R manage power consumption?
The device features dynamic power management of core and peripherals, software-controlled clock gating, and low power stop mode).
- What are some typical applications of the SPC5633MF2MLQ60R?
Typical applications include automotive systems, industrial control systems, and various embedded systems requiring high performance and low power consumption).
- Where can I find detailed specifications for the SPC5633MF2MLQ60R?
Detailed specifications can be found in the datasheet available on NXP's official website, Digi-Key, Mouser, and other authorized distributors).
