Overview
The PTN5150HXMP is a USB Type-C Configuration Channel (CC) logic chip developed by NXP USA Inc. This component is designed to support USB Type-C connector applications with advanced configuration channel control logic detection and indication functions. It enables the use of USB Type-C connectors in both host and device ends of the Type-C cable, supporting Type-C to USB legacy cables and adapters as defined in the USB Type-C specification. The PTN5150HXMP can operate autonomously or be connected to a controller via an I²C-bus interface, and it can be configured to dual role, host, or device mode through external configuration pins or the I²C interface.
Key Specifications
| Parameter | Description |
|---|---|
| Package | 12-X2QFN |
| Supply Voltage | 2.7V to 5.5V |
| Operating Temperature | -40°C to +85°C |
| Number of Pins | 12 |
| Number of Ports | 1 |
| VBUS Detection | 28V Absolute Max Tolerance |
| ESD Protection | Exceeds 7000V HBM per JDS-001-2012 and 500V CDM per JESD22-C101 |
| Moisture Sensitivity Level (MSL) | 3 (168 hours) |
| Current Modes | Default (500mA/900mA), Medium (1.5A), High (3.0A) |
Key Features
- Supports USB Type-C connectors in both host and device roles.
- Compatible with legacy OTG hardware and software.
- Detects plug orientation, role, and charging current.
- USB-ID pin for OTG applications and I²C-bus interface support for fast mode.
- PORT input pin to configure in DRP (Hi-Z), UFP (low), or DFP (high) modes.
- Integrates Rd resistor in UFP mode and reports detailed port states and accessory modes in I²C registers.
- Supports VCONN1/2 power detected status through VCONN Status I²C register.
- High ESD protection for VBUS and CC1/2 pins.
Applications
- Tablets and mobile devices.
- Ultrabook and notebook computers.
- Docking stations.
- Power banks, chargers, and adapters.
- Portable electronics and devices.
Q & A
- What is the PTN5150HXMP used for?
The PTN5150HXMP is used to support USB Type-C connector applications with configuration channel control logic detection and indication functions.
- What are the operating voltage and temperature ranges of the PTN5150HXMP?
The operating voltage range is 2.7V to 5.5V, and the operating temperature range is -40°C to +85°C.
- How can the PTN5150HXMP be configured?
The PTN5150HXMP can be configured to dual role, host, or device mode through an external configuration pin or through the I²C interface.
- What types of current modes does the PTN5150HXMP support?
The PTN5150HXMP supports default (500mA/900mA), medium (1.5A), and high (3.0A) current modes.
- Does the PTN5150HXMP have ESD protection?
- What package type does the PTN5150HXMP come in?
The PTN5150HXMP comes in a 12-X2QFN package.
- Is the PTN5150HXMP RoHS compliant?
- What is the VBUS detection tolerance of the PTN5150HXMP?
The VBUS detection tolerance is 28V Absolute Max.
- Can the PTN5150HXMP work autonomously?
- What are some common applications of the PTN5150HXMP?
