Overview
The PCA82C250T/YM,115 is a CAN (Controller Area Network) transceiver produced by NXP USA Inc. This device serves as the interface between a CAN protocol controller and the physical bus, providing differential transmit and receive capabilities. It is designed to meet the high-speed requirements of automotive applications, ensuring compliance with the ISO 11898 standard. The PCA82C250T/YM,115 is packaged in an SOIC (Small Outline Integrated Circuit) package with 8 leads, making it compact and suitable for various automotive and industrial environments.
Key Specifications
| Parameter | Min | Max | Unit |
|---|---|---|---|
| Supply Voltage (VCC) | 4.5 | 5.5 | V |
| Data Rate | - | 1 MBd | - |
| Operating Temperature | -40°C | 125°C | °C |
| No. of TX Buffers | 1 | - | - |
| No. of RX Buffers | 1 | - | - |
| No. of Pins | 8 | - | - |
| No. of Drivers | 1 | - | - |
| No. of Receivers | 1 | - | - |
| IC Case / Package | SOIC | - | - |
Key Features
- Fully compatible with the ISO 11898 standard.
- High-speed operation up to 1 MBd.
- Bus lines protected against transients in an automotive environment.
- Slope control to reduce Radio Frequency Interference (RFI).
- Differential receiver with wide common-mode range for high immunity against Electromagnetic Interference (EMI).
- Thermally protected and short-circuit proof to battery and ground.
- Low-current Standby mode.
- An unpowered node does not disturb the bus lines.
- At least 110 nodes can be connected.
Applications
The PCA82C250T/YM,115 is primarily intended for high-speed automotive applications, including but not limited to:
- Automotive networking systems.
- Vehicle control systems.
- Industrial automation where high-speed CAN communication is required.
Q & A
- What is the PCA82C250T/YM,115 used for?
The PCA82C250T/YM,115 is used as an interface between a CAN protocol controller and the physical bus in high-speed automotive and industrial applications.
- What is the maximum data rate of the PCA82C250T/YM,115?
The maximum data rate is up to 1 MBd.
- What is the operating temperature range of the PCA82C250T/YM,115?
The operating temperature range is from -40°C to 125°C.
- Is the PCA82C250T/YM,115 protected against electrical transients?
Yes, the device is protected against electrical transients in an automotive environment.
- What type of package does the PCA82C250T/YM,115 come in?
The device is packaged in an SOIC (Small Outline Integrated Circuit) package with 8 leads.
- How many nodes can be connected using the PCA82C250T/YM,115?
At least 110 nodes can be connected.
- Does the PCA82C250T/YM,115 have thermal protection?
Yes, the device is thermally protected and will reduce power dissipation if the junction temperature exceeds approximately 160°C.
- Is the PCA82C250T/YM,115 compatible with the ISO 11898 standard?
Yes, it is fully compatible with the ISO 11898 standard.
- What is the supply voltage range for the PCA82C250T/YM,115?
The supply voltage range is from 4.5V to 5.5V.
- Does the PCA82C250T/YM,115 have a low-current Standby mode?
Yes, it has a low-current Standby mode.
