NXP USA Inc. MPC860TCZQ66D4

The MPC860TCZQ66D4 is a member of the MPC860 PowerQUICC family, a series of integrated microprocessors and peripheral controllers developed by NXP USA Inc. This device is designed to provide a versatile and powerful solution for various communication and embedded systems applications. The MPC860 integrates a 32-bit core based on Power Architecture technology, along with a range of peripherals and interfaces, making it suitable for complex system designs.

• Embedded 32-bit Core: Single-issue core with thirty-two 32-bit general-purpose registers, implementing Power Architecture technology with branch prediction and conditional prefetch without conditional execution.
• Cache Memory: 4- or 8-Kbyte data cache and 4- or 16-Kbyte instruction cache, with set-associative configurations.
• Memory Interface: Glueless interface to DRAM, SIMMS, SRAM, EPROM, Flash EPROM, and other memory devices. Programmable DRAM controller with up to 15 wait states per memory bank.
• Timers and Interrupts: Four 16-bit timers or two 32-bit timers with gate mode and interrupt masking on reference match and event capture.
• Communication Processor Module (CPM): RISC communications processor with communication-specific commands and support for continuous mode transmission and reception on all serial channels).
• Serial and Parallel Interfaces: SPI, I2C, and parallel interface port (PIP) with Centronics interface support. PCMCIA interface supporting two independent sockets and eight memory or I/O windows).
• Low Power Modes: Full on, doze, sleep, deep sleep, and power down modes to manage power consumption efficiently).
• Debug Interface: Eight comparators for instruction and data address watchpoints with breakpoint generation).

The MPC860TCZQ66D4 is designed for use in a variety of applications, including:

• Telecommunications: Supports T1, CEPT, PCM highway, ISDN basic rate, ISDN primary rate, and user-defined time-slot configurations).
• Embedded Systems: Suitable for complex embedded system designs requiring integrated microprocessor and peripheral functions.
• Industrial Control Systems: Can be used in industrial control systems due to its robust set of peripherals and low power modes.
• Networking Equipment: Applicable in networking equipment requiring high-performance processing and multiple interface capabilities.

1. What is the MPC860TCZQ66D4?

   The MPC860TCZQ66D4 is a member of the MPC860 PowerQUICC family, an integrated microprocessor and peripheral controller developed by NXP USA Inc.

2. What type of core does the MPC860TCZQ66D4 use?

   The MPC860TCZQ66D4 uses a 32-bit core based on Power Architecture technology.

3. What are the cache memory configurations available on the MPC860TCZQ66D4?

   The device has 4- or 8-Kbyte data cache and 4- or 16-Kbyte instruction cache configurations.

4. What types of memory interfaces does the MPC860TCZQ66D4 support?

   The device supports glueless interfaces to DRAM, SIMMS, SRAM, EPROM, Flash EPROM, and other memory devices.

5. What are the low power modes available on the MPC860TCZQ66D4?

   The device has full on, doze, sleep, deep sleep, and power down modes to manage power consumption efficiently.

6. Does the MPC860TCZQ66D4 support PCMCIA interfaces?

   Yes, it supports two independent PCMCIA sockets and eight memory or I/O windows.

7. What is the package type of the MPC860TCZQ66D4?

   The device is packaged in a 357-pin ball grid array (BGA).

8. What are the operating voltage ranges for the MPC860TCZQ66D4?

   The operating voltage ranges are 3.0 to 3.6 V for frequencies at 40 MHz or less, and 3.135 to 3.465 V for frequencies greater than 40 MHz.

9. Is the MPC860TCZQ66D4 still in production?

   No, the MPC860TCZQ66D4 is no longer manufactured and is considered obsolete).

10. What are some common applications for the MPC860TCZQ66D4?

    Common applications include telecommunications, embedded systems, industrial control systems, and networking equipment.