Overview
The 74HC4051N,652 is a high-speed CMOS analog multiplexer/demultiplexer produced by NXP USA Inc. This component is part of the 74HC series and is designed to provide efficient signal routing and selection in various electronic systems. It operates as an 8-channel analog multiplexer/demultiplexer, making it suitable for both analog and digital applications.
Key Specifications
| Parameter | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| VCC (Supply Voltage) | - | 2.0 | - | 10.0 | V |
| VIH (HIGH-level input voltage) | VCC = 4.5 V to 5.5 V | 2.0 | - | - | V |
| VIL (LOW-level input voltage) | VCC = 4.5 V to 5.5 V | - | - | 0.8 | V |
| II (input leakage current) | VCC = 5.5 V; VEE = 0 V | - | - | ±1.0 μA | μA |
| IS(OFF) (OFF-state leakage current) | VCC = 10.0 V; VEE = 0 V | - | - | ±1.0 μA | μA |
| tpd (propagation delay) | VCC = 4.5 V; VEE = 0 V | 4 | - | 12 | ns |
| Operating Temperature | - | -40 | - | 125 | °C |
| Package | - | - | - | 16-DIP | - |
Key Features
- High-speed CMOS logic
- 8-channel analog multiplexer/demultiplexer
- Wide operating voltage range of 2V to 10V
- Low power consumption
- High input impedance and low input current
- Low ON-state resistance (max 120 Ohm)
- Fast switch times (max 51ns, 42ns)
- Robust through-hole package construction
- Compliance with industry standards and safety regulations
Applications
- Digital logic and control circuits
- Signal routing and selection
- Industrial automation and control systems
- Automotive electronics
- Consumer electronics
Q & A
- What is the primary function of the 74HC4051N,652?
The 74HC4051N,652 is an 8-channel analog multiplexer/demultiplexer, allowing it to select one of eight input signals and route it to a single output.
- What is the operating voltage range of the 74HC4051N,652?
The operating voltage range is from 2V to 10V.
- What is the maximum propagation delay of the 74HC4051N,652?
The maximum propagation delay is 12 ns at VCC = 4.5 V to 5.5 V.
- What is the package type of the 74HC4051N,652?
The package type is 16-DIP (Dual In-Line Package).
- What are the typical applications of the 74HC4051N,652?
Typical applications include digital logic and control circuits, signal routing and selection, industrial automation, automotive electronics, and consumer electronics.
- Is the 74HC4051N,652 suitable for high-speed applications?
Yes, it is designed for high-speed CMOS logic and has fast switch times, making it suitable for high-speed applications.
- What is the maximum ON-state resistance of the 74HC4051N,652?
The maximum ON-state resistance is 120 Ohm.
- Does the 74HC4051N,652 comply with industry standards and safety regulations?
Yes, it complies with industry standards and safety regulations.
- What is the operating temperature range of the 74HC4051N,652?
The operating temperature range is from -40°C to 125°C.
- Is the 74HC4051N,652 still in active production?
No, the 74HC4051N,652 is not mentioned as being obsolete in the provided sources, but it is advisable to check with the manufacturer for the current production status.
