Overview
The ADIN1300CCPZ from Analog Devices Inc. is a robust, industrial-grade, low-latency, and low-power Gigabit Ethernet transceiver. This device is designed primarily for industrial Ethernet applications and complies with IEEE 802.3 standards for 10BASE-Te, 100BASE-TX, and 1000BASE-T operations. It integrates an energy-efficient Ethernet (EEE) physical layer device (PHY) core along with associated analog circuitry, input and output clock buffering, management interface, and MAC interface and control logic. The ADIN1300CCPZ is available in a 40-lead LFCSP package and operates with a temperature range of -40°C to +105°C.
Key Specifications
| Parameter | Value | Unit | Comments |
|---|---|---|---|
| Compliance | IEEE 802.3 | - | 10BASE-Te, 100BASE-TX, 1000BASE-T |
| MAC Interfaces | MII, RMII, RGMII | - | - |
| Package Type | LFCSP-EP | - | 40-lead |
| Operating Voltage | 3.135 V to 3.465 V | V | - |
| Temperature Range | -40°C to +105°C | °C | - |
| Clock Input Frequency | 25 MHz (MII), 50 MHz (RMII) | MHz | - |
| Cable Length Support | Up to 150 meters at 1 Gbps, up to 180 meters at 100 Mbps or 10 Mbps | meters | - |
| Management Interface | MDIO/MDC | - | Compatible with IEEE 802.3 Standard Clause 22 and Clause 45 |
Key Features
- Programmable RGMII timing delay and drive current, supports Time-Sensitive Networking (TSN)
- Unmanaged configuration using multilevel pin strapping
- Energy-Efficient Ethernet (EEE) in accordance with IEEE 802.3az
- Start of packet detection for IEEE 1588 time stamp support, enhanced link detection
- Voltage mode MDI drivers, eliminates termination resistors, RJ45 MDI flip capability
- Automatic polarity and pair swap correction, cable diagnostics (TDR and signal analysis)
- Frame generator and checker, multiple loopback modes, configurable LED
- Brown-out protection and hardware reset functionality
Applications
- Industrial Ethernet applications
- Test and measurement equipment
- Industrial Internet of Things (IoT) devices
Q & A
- What are the supported Ethernet speeds for the ADIN1300CCPZ?
The ADIN1300CCPZ supports 10BASE-Te, 100BASE-TX, and 1000BASE-T Ethernet speeds.
- What MAC interfaces does the ADIN1300CCPZ support?
The ADIN1300CCPZ supports MII, RMII, and RGMII MAC interfaces.
- What is the package type and pin count of the ADIN1300CCPZ?
The ADIN1300CCPZ is available in a 40-lead LFCSP package.
- What is the operating temperature range of the ADIN1300CCPZ?
The operating temperature range is from -40°C to +105°C.
- Does the ADIN1300CCPZ support Energy-Efficient Ethernet (EEE)?
- What management interface does the ADIN1300CCPZ use?
The ADIN1300CCPZ uses an MDIO/MDC management interface compatible with IEEE 802.3 Standard Clause 22 and Clause 45.
- What cable lengths does the ADIN1300CCPZ support?
The device supports cable lengths up to 150 meters at 1 Gbps and up to 180 meters at 100 Mbps or 10 Mbps.
- Does the ADIN1300CCPZ have built-in diagnostic features?
- What is the purpose of the brown-out protection in the ADIN1300CCPZ?
The brown-out protection monitors the power supplies and holds the device in hardware reset if any supply drops below a minimum threshold.
- Can the ADIN1300CCPZ be configured for different voltage levels?
