Overview
The ADIN1300BCPZ is a low power, single port, Gigabit Ethernet transceiver designed primarily for industrial Ethernet applications. It integrates an energy-efficient Ethernet (EEE) physical layer device (PHY) core with associated common analog circuitry, input and output clock buffering, management interface, and MAC interface and control logic. This device is optimized for low latency and power consumption, making it suitable for various industrial and IoT applications.
Key Specifications
| Attribute | Value |
|---|---|
| Manufacturer | Analog Devices Inc. |
| Part Number | ADIN1300BCPZ-R7 |
| Package | 40-lead LFCSP (6x6 mm) |
| Protocol | IEEE 802.3 (10BASE-Te, 100BASE-TX, 1000BASE-T) |
| Data Rate | 10 Mbps, 100 Mbps, 1 Gbps |
| Duplex | Full, Half |
| Supply Voltage | 1.71V ~ 1.89V, 2.25V ~ 2.75V, 3.14V ~ 3.46V |
| Operating Temperature | -40°C to +85°C |
| Mounting Type | Surface Mount |
| Cable Length Support | Up to 150 meters at Gigabit speeds, up to 180 meters at 100 Mbps or 10 Mbps |
Key Features
- Compliant with IEEE 802.3 standards for 10BASE-Te, 100BASE-TX, and 1000BASE-T
- Supports MII, RMII, and RGMII MAC interfaces
- Programmable RGMII timing delay and drive current, supports Time Sensitive Networking (TSN)
- Energy Efficient Ethernet (EEE) in accordance with IEEE 802.3az
- MDIO/MDC management interface and interrupt pin
- Start of packet detection for IEEE 1588 time stamp support and enhanced link detection
- Voltage mode MDI drivers, eliminating termination resistors, with RJ45 MDI flip capability
- Automatic polarity and pair swap correction, cable diagnostics (TDR and signal analysis)
- Frame generator and checker, multiple loopback modes, configurable LED
- Brown-out protection and hardware reset until power supplies return to safe levels
Applications
- Industrial automation
- Process control
- Factory automation
- Robotics and motion control
- Time Sensitive Networking (TSN)
- Building automation
- Test and measurement
- Industrial Internet of Things (IoT)
Q & A
- What is the primary application of the ADIN1300BCPZ?
The ADIN1300BCPZ is primarily designed for industrial Ethernet applications, including industrial automation, process control, and IoT.
- What are the supported data rates for the ADIN1300BCPZ?
The device supports data rates of 10 Mbps, 100 Mbps, and 1 Gbps.
- What is the operating temperature range of the ADIN1300BCPZ?
The operating temperature range is from -40°C to +85°C.
- Does the ADIN1300BCPZ support Time Sensitive Networking (TSN)?
- What is the package type of the ADIN1300BCPZ?
The device is packaged in a 40-lead LFCSP (6x6 mm).
- Does the ADIN1300BCPZ have brown-out protection?
- What management interface does the ADIN1300BCPZ use?
The device uses an MDIO/MDC management interface.
- Can the ADIN1300BCPZ perform cable diagnostics?
- Is the ADIN1300BCPZ compliant with IEEE 802.3 standards?
- Does the ADIN1300BCPZ support automatic polarity and pair swap correction?
