Overview
The ADIN1200CCP32Z-RL, produced by Analog Devices Inc., is a low-power, single-port Ethernet transceiver designed for industrial Ethernet applications. It supports both 10 Mbps and 100 Mbps data rates and is compliant with IEEE 802.3 standards. This device integrates an energy-efficient Ethernet (EEE) physical layer device (PHY) core along with associated analog circuitry, clock buffering, management interface, and MAC interface control logic. The ADIN1200 is available in a compact 32-lead, 5 mm × 5 mm lead frame chip scale package (LFCSP) and operates over a wide temperature range of −40°C to +105°C and −40°C to +85°C.
Key Specifications
| Parameter | Value | Unit | Comments |
|---|---|---|---|
| Data Rate | 10 Mbps / 100 Mbps | - | IEEE 802.3 compliant |
| MAC Interfaces | MII, RMII, RGMII | - | - |
| Latency (100BASE-TX RGMII) | Transmit: <124 ns, Receive: <250 ns | ns | - |
| Latency (100BASE-TX MII) | Transmit: <52 ns, Receive: <248 ns | ns | - |
| Power Consumption | 139 mW (100BASE-TX) | mW | - |
| VDDIO Supply | 1.8 V / 2.5 V / 3.3 V | V | Single-supply operation with 3.3 V VDDIO |
| Package | 32-lead LFCSP (5 mm × 5 mm) | - | - |
| Temperature Range | −40°C to +105°C and −40°C to +85°C | °C | Ambient operation |
| EMC Compliance | IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-6, EN55032 | - | - |
Key Features
- 10BASE-Te/100BASE-TX IEEE 802.3 compliant
- MII, RMII, and RGMII MAC interfaces
- Low latency: 100BASE-TX RGMII latency transmit <124 ns, receive <250 ns; 100BASE-TX MII latency transmit <52 ns, receive <248 ns
- Programmable RGMII timing delay and drive current
- Supports Time Sensitive Networking (TSN)
- EMC test standards compliance: IEC 61000-4-5 surge (±4 kV), IEC 61000-4-4 electrical fast transient (EFT) (±4 kV), IEC 61000-4-6 conducted immunity (10 V), EN55032 radiated and conducted emissions (Class A)
- Unmanaged configuration using multilevel pin strapping
- MDIO/MDC management interface and interrupt pin
- Energy Efficient Ethernet (EEE) in accordance with IEEE 802.3az
- Start of packet detection for IEEE 1588 time stamp support
- Enhanced link detection and cable diagnostics (TDR and signal analysis)
- Configurable LED
- Crystal oscillator/clock input: 25 MHz; 25 MHz/125 MHz synchronous clock output
- Jumbo frame support up to 16 kBytes
- Synchronous Ethernet (SyncE) clock recovery
- Integrated power supply monitoring and power-on-reset (POR)
Applications
- Industrial automation
- Process control
- Factory automation
- Robotics and motion control
- Time sensitive networking (TSN)
- Building automation
- Test and measurement
- Industrial internet of things (IoT)
Q & A
- What are the supported data rates for the ADIN1200?
The ADIN1200 supports both 10 Mbps and 100 Mbps data rates.
- What MAC interfaces does the ADIN1200 support?
The ADIN1200 supports MII, RMII, and RGMII MAC interfaces.
- What is the latency for 100BASE-TX RGMII and MII interfaces?
For 100BASE-TX RGMII, the latency is transmit <124 ns and receive <250 ns. For 100BASE-TX MII, the latency is transmit <52 ns and receive <248 ns.
- What are the power consumption and supply voltage options for the ADIN1200?
The power consumption is 139 mW for 100BASE-TX, and it supports single-supply operation with 3.3 V VDDIO, as well as separate VDDIO supplies at 1.8 V, 2.5 V, or 3.3 V.
- What is the package type and size of the ADIN1200?
The ADIN1200 is available in a 32-lead, 5 mm × 5 mm lead frame chip scale package (LFCSP).
- What is the operating temperature range for the ADIN1200?
The operating temperature range is −40°C to +105°C and −40°C to +85°C.
- Does the ADIN1200 support Time Sensitive Networking (TSN)?
- What EMC standards does the ADIN1200 comply with?
The ADIN1200 complies with IEC 61000-4-5 surge, IEC 61000-4-4 electrical fast transient, IEC 61000-4-6 conducted immunity, and EN55032 radiated and conducted emissions (Class A).
- Does the ADIN1200 have any power management features?
- What are some of the key applications for the ADIN1200?
