Overview
The ADIN1200BCP32Z-RL, produced by Analog Devices Inc., is a low power, single-port Ethernet transceiver designed for industrial Ethernet applications. It supports both 10 Mbps and 100 Mbps data rates and is compliant with IEEE 802.3 standards. This device integrates an energy-efficient Ethernet (EEE) physical layer device (PHY) core along with associated analog circuitry, clock buffering, management interfaces, and MAC interface logic. The ADIN1200 is housed in a compact 32-lead, 5 mm × 5 mm lead frame chip scale package (LFCSP) and operates over a wide temperature range of −40°C to +105°C and −40°C to +85°C, making it suitable for various industrial environments.
Key Specifications
| Parameter | Value | Unit | Comments |
|---|---|---|---|
| Data Rate | 10 Mbps, 100 Mbps | - | IEEE 802.3 compliant |
| MAC Interfaces | MII, RMII, RGMII | - | - |
| Latency (100BASE-TX RGMII) | Transmit: <124 ns, Receive: <250 ns | ns | - |
| Latency (100BASE-TX MII) | Transmit: <52 ns, Receive: <248 ns | ns | - |
| Supply Voltage | 3.3 V, 2.5 V, 1.8 V | V | VDDIO supply |
| Power Consumption (100BASE-TX) | 139 mW | mW | - |
| Package Type | 32-lead LFCSP (5 mm × 5 mm × 0.75 mm) | - | - |
| Operating Temperature | −40°C to +105°C and −40°C to +85°C | °C | Ambient operation |
| Cable Length Support | Up to 180 meters | meters | - |
Key Features
- IEEE 802.3 compliant for 10BASE-Te and 100BASE-TX
- Support for MII, RMII, and RGMII MAC interfaces
- Low latency specifications: 100BASE-TX RGMII latency transmit <124 ns, receive <250 ns; 100BASE-TX MII latency transmit <52 ns, receive <248 ns
- Programmable RGMII timing delay and drive current
- Support for Time-Sensitive Networking (TSN)
- Compliance with various EMC test standards: IEC 61000-4-5 surge, IEC 61000-4-4 EFT, IEC 61000-4-6 conducted immunity, EN55032 radiated and conducted emissions
- Unmanaged configuration using multilevel pin strapping
- MDIO/MDC management interface and interrupt pin
- Energy Efficient Ethernet (EEE) in accordance with IEEE 802.3az
- Start of packet detection for IEEE 1588 time stamp support
- Enhanced link detection and cable diagnostics (TDR and signal analysis)
- Configurable LED and crystal oscillator/clock input: 25 MHz
- 25 MHz/125 MHz synchronous clock output and jumbo frame support up to 16 kBytes
- Synchronous Ethernet (SyncE) clock recovery
- Integrated power supply monitoring and power-on-reset (POR)
Applications
- Industrial automation
- Process control
- Factory automation
- Robotics and motion control
- Time-sensitive networking (TSN)
- Building automation
- Test and measurement
- Industrial internet of things (IoT)
Q & A
- What are the supported data rates for the ADIN1200?
The ADIN1200 supports both 10 Mbps and 100 Mbps data rates.
- What MAC interfaces does the ADIN1200 support?
The ADIN1200 supports MII, RMII, and RGMII MAC interfaces.
- What is the latency for 100BASE-TX RGMII and MII interfaces?
For 100BASE-TX RGMII, the latency is transmit <124 ns and receive <250 ns. For 100BASE-TX MII, the latency is transmit <52 ns and receive <248 ns.
- What are the supply voltage options for the ADIN1200?
The ADIN1200 can operate with supply voltages of 3.3 V, 2.5 V, or 1.8 V.
- What is the power consumption of the ADIN1200 for 100BASE-TX operation?
The power consumption for 100BASE-TX operation is 139 mW.
- What is the operating temperature range of the ADIN1200?
The ADIN1200 operates over a temperature range of −40°C to +105°C and −40°C to +85°C.
- What is the maximum cable length supported by the ADIN1200?
The ADIN1200 supports cable lengths up to 180 meters.
- Does the ADIN1200 support Time-Sensitive Networking (TSN)?
Yes, the ADIN1200 supports Time-Sensitive Networking (TSN).
- What EMC test standards does the ADIN1200 comply with?
The ADIN1200 complies with various EMC test standards including IEC 61000-4-5 surge, IEC 61000-4-4 EFT, IEC 61000-4-6 conducted immunity, and EN55032 radiated and conducted emissions.
- Does the ADIN1200 have integrated power supply monitoring and POR?
Yes, the ADIN1200 has integrated power supply monitoring and power-on-reset (POR) features.
