Overview
The TMS320F241FN is a member of the 24x generation of digital signal processor (DSP) controllers from Texas Instruments. It is based on the TMS320C2000 platform, which is optimized for digital motor and motion control applications. This DSP controller combines the enhanced TMS320 DSP family architectural design of the C2xx core CPU, providing low-cost, high-performance processing capabilities along with several advanced peripherals tailored for motor and motion control.
Key Specifications
| Specification | Value |
|---|---|
| Instruction Cycle Time | 50 ns |
| On-Chip Memory | 544 Words x 16 Bits of Data/Program Dual-Access RAM (DARAM), 8K Words x 16 Bits of Flash EEPROM |
| Package Type | 68-Pin PLCC (FN Package) |
| Analog-to-Digital Converter (ADC) | Single 10-Bit ADC Module with 8 Multiplexed Input Channels |
| Event-Manager Module | Eight Compare/PWM Channels, Two 16-Bit General-Purpose Timers, Three 16-Bit Full Compare Units with Deadband, Three Capture Units |
| Serial Communications | Serial Communications Interface (SCI) Module, 16-Bit Serial Peripheral Interface (SPI) Module |
| Controller Area Network (CAN) | CAN Module |
| General-Purpose I/O (GPIO) | 26 Individually Programmable, Multiplexed GPIO Pins |
| Power Supply | 5 V |
| Temperature Range | Commercial and Industrial Temperature Available |
Key Features
- High-Performance Static CMOS Technology
- Includes the TMS320C2xx Core CPU, object-compatible and source-code-compatible with TMS320C25 and upwardly compatible with TMS320C5x
- Event-Manager Module with general-purpose timers and PWM registers
- Single 10-Bit Analog-to-Digital Converter (ADC) with 8 multiplexed input channels, capable of conversion within 1 µs
- Controller Area Network (CAN) Module
- Serial Communications Interface (SCI) and 16-Bit Serial Peripheral Interface (SPI) Modules
- Watchdog (WD) Timer Module and Phase-Locked-Loop (PLL)-Based Clock Module
- Three Power-Down Modes for Low-Power Operation
- Scan-Based Emulation and Development Tools Available
Applications
The TMS320F241FN is primarily optimized for digital motor and motion control applications. It is suitable for use in various industrial and automotive systems that require precise control over motors and other motion-related components. Other potential applications include power electronics, robotics, and any system requiring high-performance DSP capabilities combined with advanced peripherals.
Q & A
- What is the TMS320F241FN based on?
The TMS320F241FN is based on the TMS320C2000 platform, specifically the 24x generation of digital signal processor controllers.
- What is the instruction cycle time of the TMS320F241FN?
The instruction cycle time is 50 ns.
- What types of memory does the TMS320F241FN have?
The device includes 544 Words x 16 Bits of Data/Program Dual-Access RAM (DARAM) and 8K Words x 16 Bits of Flash EEPROM.
- What package types are available for the TMS320F241FN?
The TMS320F241FN is available in a 68-Pin PLCC (FN Package) and a 64-Pin QFP (PG Package).
- Does the TMS320F241FN have an external memory interface?
No, the TMS320F241FN does not have an external memory interface.
- What is the resolution of the Analog-to-Digital Converter (ADC) on the TMS320F241FN?
The ADC is a single 10-Bit module with 8 multiplexed input channels.
- What are the key peripherals of the TMS320F241FN?
The key peripherals include the Event-Manager Module, CAN Module, SCI and SPI Modules, and a Watchdog Timer Module.
- How many GPIO pins does the TMS320F241FN have?
The device has 26 individually programmable, multiplexed GPIO pins.
- What are the power-down modes available on the TMS320F241FN?
The device has three power-down modes for low-power operation.
- What development tools are available for the TMS320F241FN?
Development tools include Texas Instruments' ANSI C Compiler, Assembler/Linker, C-Source Debugger, and various emulation products.
