LT1013DP
  • Share:

Texas Instruments LT1013DP

Manufacturer No:
LT1013DP
Manufacturer:
Texas Instruments
Package:
Tube
Description:
IC OPAMP GP 2 CIRCUIT 8DIP
Delivery:
Payment:
iso14001
iso45001
iso9001
iso13485

Product Introduction

Overview

The LT1013DP, produced by Texas Instruments, is a dual precision operational amplifier that offers high performance and versatility. This device is part of the LT1013x series, which is known for its single-supply operation, low noise, and high gain. The LT1013DP can operate from a single 5-V power supply or dual ±15-V supplies, making it suitable for a wide range of applications. The input voltage range extends to ground, and the output can swing to within a few millivolts of ground, eliminating crossover distortion. This operational amplifier is characterized for operation from 0°C to 70°C, making it reliable in various environmental conditions.

Key Specifications

Parameter Test Conditions Min Max Unit
Input Offset Voltage (VIO) RS = 50 Ω, 25°C 60 300 400 µV
Temperature Coefficient of Input Offset Voltage (αVIO) Full range 0.4 2.5 µV/°C
Input Offset Current (IIO) 25°C 0.2 1.5 2.8 nA
Input Bias Current (IIB) 25°C -15 -30 -38 nA
Common-Mode Input Voltage Range (VICR) Recommended range, 25°C -15 - 13.5 V
Maximum Peak Output Voltage Swing (VOM) RL = 2 kΩ, 25°C ±12.5 - ±14 V
Supply Current per Amplifier (ICC) 25°C 0.32 0.5 0.55 mA

Key Features

  • Single-Supply Operation: Can operate from a single 5-V power supply or dual ±15-V supplies.
  • Input Voltage Range: Extends to ground.
  • Output Swing: Output can swing to within a few millivolts of ground while sinking current.
  • Phase Reversal Protection: Protects against phase reversal.
  • Low Noise: Low peak-to-peak noise voltage (0.55 µV typical) and low current noise (0.07 pA/√Hz typical).
  • High Gain: Minimum gain of 1.5 V/µV (RL = 2 kΩ) for LT1013AM.
  • Low Supply Current: Maximum supply current of 0.5 mA at TA = 25°C for LT1013AM.
  • Low Offset Voltage and Drift: Maximum input offset voltage of 150 µV at 25°C and a temperature coefficient of 2 µV/°C for LT1013AM.

Applications

  • Thermocouple Amplifiers: Suitable for precise temperature measurements.
  • Low-Side Current Measurement: Ideal for measuring current in low-side configurations.
  • Instrumentation Amplifiers: Used in various instrumentation applications requiring high precision and low noise.

Q & A

  1. What is the input voltage range of the LT1013DP?

    The input voltage range extends to ground, allowing for single-supply operation and including ground in the common-mode input voltage range.

  2. Can the LT1013DP operate with a single power supply?
  3. What is the maximum input offset voltage of the LT1013DP?

    The maximum input offset voltage is 400 µV at 25°C.

  4. What is the typical supply current per amplifier for the LT1013DP?

    The typical supply current per amplifier is 0.5 mA at 25°C.

  5. What are the key applications of the LT1013DP?

    The LT1013DP is suitable for thermocouple amplifiers, low-side current measurement, and instrumentation amplifiers.

  6. Does the LT1013DP have phase reversal protection?
  7. What is the maximum peak output voltage swing of the LT1013DP?

    The maximum peak output voltage swing is ±14 V with RL = 2 kΩ at 25°C.

  8. What is the temperature coefficient of the input offset voltage for the LT1013DP?

    The temperature coefficient of the input offset voltage is 2.5 µV/°C maximum.

  9. What are the package options available for the LT1013DP?

    The LT1013DP is available in SOIC (8 pins) and PDIP (8 pins) packages.

  10. What is the junction-to-ambient thermal resistance for the SOIC package of the LT1013DP?

    The junction-to-ambient thermal resistance for the SOIC package is 101.6 °C/W.

Product Attributes

Amplifier Type:General Purpose
Number of Circuits:2
Output Type:- 
Slew Rate:0.4V/µs
Gain Bandwidth Product:1 MHz
-3db Bandwidth:- 
Current - Input Bias:18 nA
Voltage - Input Offset:90 µV
Current - Supply:320µA (x2 Channels)
Current - Output / Channel:- 
Voltage - Supply Span (Min):5 V
Voltage - Supply Span (Max):30 V
Operating Temperature:0°C ~ 70°C (TA)
Mounting Type:Through Hole
Package / Case:8-DIP (0.300", 7.62mm)
Supplier Device Package:8-PDIP
0 Remaining View Similar

In Stock

$5.34
24

Please send RFQ , we will respond immediately.

Same Series
DD26M2S5WV5X
DD26M2S5WV5X
CONN D-SUB HD PLUG 26P SLDR CUP
DD44S32S60T20
DD44S32S60T20
CONN D-SUB HD RCPT 44P VERT SLDR
DD44M32S50V50
DD44M32S50V50
CONN D-SUB HD PLUG 44P VERT SLDR
DD26S2S0TX
DD26S2S0TX
CONN D-SUB HD RCPT 26P SLDR CUP
CBC47W1S100V50
CBC47W1S100V50
CONN D-SUB RCPT 47POS CRIMP
DD26M20HV50/AA
DD26M20HV50/AA
CONN D-SUB HD PLUG 26P SLDR CUP
CBC13W3S10HE2S/AA
CBC13W3S10HE2S/AA
CONN D-SUB RCPT 13POS CRIMP
DD26S2S0V5X
DD26S2S0V5X
CONN D-SUB HD RCPT 26P SLDR CUP
DD26S200V50/AA
DD26S200V50/AA
CONN D-SUB HD RCPT 26P SLDR CUP
DD44S32S600X
DD44S32S600X
CONN D-SUB HD RCPT 44P VERT SLDR
DD44S32S000
DD44S32S000
CONN D-SUB HD RCPT 44P VERT SLDR
DD26S20L0X
DD26S20L0X
CONN D-SUB HD RCPT 26P SLDR CUP

Similar Products

Part Number LT1013DP LT1013IP LT1013CP LT1013DD LT1013DIP
Manufacturer Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Status Active Active Active Active Active
Amplifier Type General Purpose General Purpose General Purpose General Purpose General Purpose
Number of Circuits 2 2 2 2 2
Output Type - - - - -
Slew Rate 0.4V/µs 0.4V/µs 0.4V/µs 0.4V/µs 0.4V/µs
Gain Bandwidth Product 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz
-3db Bandwidth - - - - -
Current - Input Bias 18 nA 15 nA 15 nA 18 nA 15 nA
Voltage - Input Offset 90 µV 60 µV 60 µV 90 µV 200 µV
Current - Supply 320µA (x2 Channels) 350µA (x2 Channels) 350µA (x2 Channels) 320µA (x2 Channels) 350µA (x2 Channels)
Current - Output / Channel - 20 mA 20 mA - -
Voltage - Supply Span (Min) 5 V 5 V 5 V 5 V 5 V
Voltage - Supply Span (Max) 30 V 30 V 30 V 30 V 30 V
Operating Temperature 0°C ~ 70°C (TA) - 0°C ~ 70°C (TA) 0°C ~ 70°C (TA) -40°C ~ 105°C (TA)
Mounting Type Through Hole Through Hole Through Hole Surface Mount Through Hole
Package / Case 8-DIP (0.300", 7.62mm) 8-DIP (0.300", 7.62mm) 8-DIP (0.300", 7.62mm) 8-SOIC (0.154", 3.90mm Width) 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP 8-PDIP 8-PDIP 8-SOIC 8-PDIP

Related Product By Categories

AD826ARZ-REEL7
AD826ARZ-REEL7
Analog Devices Inc.
IC VOLTAGE FEEDBACK 2 CIRC 8SOIC
LM7372MRX/NOPB
LM7372MRX/NOPB
Texas Instruments
IC OPAMP VFB 2 CIRCUIT 8SOPWRPAD
MC33272ADR2G
MC33272ADR2G
onsemi
IC OPAMP GP 2 CIRCUIT 8SOIC
TLV9041UIDBVR
TLV9041UIDBVR
Texas Instruments
IC OPAMP GP 1 CIRCUIT SOT23-5
INA240A2PW
INA240A2PW
Texas Instruments
IC CURR SENSE 1 CIRCUIT 8TSSOP
TLV4314IPWR
TLV4314IPWR
Texas Instruments
IC OPAMP GP 4 CIRCUIT 14TSSOP
TLV4376IPWR
TLV4376IPWR
Texas Instruments
IC CMOS 4 CIRCUIT 14TSSOP
OPA2227PA
OPA2227PA
Texas Instruments
IC OPAMP GP 2 CIRCUIT 8DIP
AD8554ARZ
AD8554ARZ
Analog Devices Inc.
IC OPAMP ZERO-DRIFT 4CIRC 14SOIC
LM2902LVIPWR
LM2902LVIPWR
Texas Instruments
IC OPAMP GP 4 CIRCUIT 14TSSOP
ADA4084-1ARZ-RL
ADA4084-1ARZ-RL
Analog Devices Inc.
IC OPAMP GP 1 CIRCUIT 8SOIC
OP249GS-REEL
OP249GS-REEL
Analog Devices Inc.
IC OPAMP JFET 2 CIRCUIT 8SOIC

Related Product By Brand

DP83848T-MAU-EK
DP83848T-MAU-EK
Texas Instruments
BOARD EVALUATION DP83848T
AFE5401TRGCRQ1
AFE5401TRGCRQ1
Texas Instruments
IC AFE 4 CHAN 12BIT 64VQFN
ADS1278SHFQ
ADS1278SHFQ
Texas Instruments
IC ADC 24BIT SIGMA-DELTA 84CFP
SN74HCT244NSR
SN74HCT244NSR
Texas Instruments
IC BUFFER NON-INVERT 5.5V 20SO
SN74LVC1G14YZVR
SN74LVC1G14YZVR
Texas Instruments
IC INVERT SCHMITT 1CH 1IN 4DSBGA
TPIC6B273DWRG4
TPIC6B273DWRG4
Texas Instruments
IC PWR OCT D LATCH 20-SOIC
UCC27284QDRQ1
UCC27284QDRQ1
Texas Instruments
AUTOMOTIVE 3-A, 120-V HALF BRIDG
TPS3711DDCR
TPS3711DDCR
Texas Instruments
IC SUPERVISOR 1 CHANNEL TSOT23-6
TPS54260DGQ
TPS54260DGQ
Texas Instruments
IC REG BUCK ADJ 2.5A 10MSOP
SN74AC14NS
SN74AC14NS
Texas Instruments
INVERTER, AC SERIES, 1-FUNC, 1-I
TPS82130SILT
TPS82130SILT
Texas Instruments
DC DC CONVERTER 0.9-5V
LMZ14203HTZ/NOPB
LMZ14203HTZ/NOPB
Texas Instruments
DC DC CONVERTER 5-30V