Overview
The TJA1081TS,118 is a FlexRay node transceiver manufactured by NXP USA Inc. This component is fully compliant with the FlexRay electrical physical layer specification V2.1 Rev. A and incorporates features from V3.0.1. It is designed for use in communication systems with data transfer rates ranging from 1 Mbit/s to 10 Mbit/s, providing an advanced interface between the protocol controller and the physical bus in a FlexRay network. The TJA1081TS,118 is optimized for time-triggered communication systems and is particularly suited for automotive applications, meeting the AEC-Q100 qualification standards.
Key Specifications
| Parameter | Value |
|---|---|
| Package Type | SSOP16 (SOT338-1) |
| Number of Pins | 16 |
| Data Rate | Up to 10 Mbps |
| Maximum Operating Temperature | 150 °C |
| Maximum Supply Current | 37 mA |
| Supply Voltages | 14 V and 42 V |
| ESD Protection | ±8 kV HBM |
| Compliance | RoHS, ELV, China RoHS, AEC-Q100 |
Key Features
- Compliant with FlexRay electrical physical layer specification V2.1 Rev. A and V3.0.1
- Optimized for time-triggered communication systems
- Data transfer rates up to 10 Mbit/s with support for 60 ns minimum bit time
- Very low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
- Auto I/O level adaptation to host controller supply voltage VIO
- Instant shut-down interface via BGE pin and independent power supply ramp-up for VBAT, VCC, and VIO
- Low power management including inhibit switch with very low current in Sleep and Standby modes
- Local and remote wake-up with wake-up source recognition
- Overtemperature detection, short-circuit on bus lines, and undervoltage detection on pins VBAT, VCC, and VIO
- Bus pins protected against transients and short-circuit proof to battery voltage and ground
- Fail-silent behavior in the event of an undervoltage and passive behavior of bus lines when not powered
Applications
The TJA1081TS,118 is primarily used in automotive communication systems, particularly in Electronic Control Units (ECUs) that are permanently connected to the battery. It is suitable for various automotive applications requiring high-speed, reliable, and low-power communication.
Q & A
- What is the TJA1081TS,118 used for?
The TJA1081TS,118 is a FlexRay node transceiver used in automotive communication systems to provide an interface between the protocol controller and the physical bus in a FlexRay network.
- What are the key compliance standards for the TJA1081TS,118?
The TJA1081TS,118 is compliant with FlexRay electrical physical layer specification V2.1 Rev. A and V3.0.1, as well as automotive standards such as AEC-Q100, RoHS, ELV, and China RoHS.
- What are the data transfer rates supported by the TJA1081TS,118?
The TJA1081TS,118 supports data transfer rates up to 10 Mbit/s.
- What is the maximum operating temperature of the TJA1081TS,118?
The maximum operating temperature is 150 °C.
- Does the TJA1081TS,118 have low power management features?
- What kind of ESD protection does the TJA1081TS,118 offer?
The TJA1081TS,118 offers protection against ±8 kV HBM ESD pulses.
- Can the TJA1081TS,118 be used in different voltage systems?
- What are the wake-up features of the TJA1081TS,118?
- Does the TJA1081TS,118 have built-in diagnostic features?
- What is the package type of the TJA1081TS,118?
