Overview
The SC16IS741AIPWJ, produced by NXP USA Inc., is a high-performance single-channel UART (Universal Asynchronous Receiver-Transmitter) that integrates an I2C-bus/SPI interface. This device is designed to facilitate seamless protocol conversion between I2C-bus or SPI and RS-232/RS-485 interfaces, making it highly versatile for various applications. It operates at data rates up to 5 Mbit/s and is optimized for low operating and sleeping current, making it suitable for handheld and battery-operated devices. The SC16IS741AIPWJ is backward-compatible with the widely used 16C450 UART, simplifying software development and porting from other platforms.
Key Specifications
Specification | Details |
---|---|
Interface | Selectable I2C-bus or SPI interface |
UART Type | Single full-duplex UART |
Operating Voltage | 3.3 V or 2.5 V |
Temperature Range | Industrial: -40°C to +95°C |
FIFO Size | 64 bytes (transmitter and receiver) |
Baud Rate | Up to 5 Mbit/s in 16× clock mode |
Flow Control | Auto hardware flow control using RTS/CTS, auto software flow control with programmable Xon/Xoff characters |
RS-485 Support | Automatic RS-485 support with driver direction control via RTS signal |
Package | TSSOP16 |
Sleep Current | Less than 30 μA at 3.3 V |
Key Features
- Single full-duplex UART with selectable I2C-bus or SPI interface
- 64 bytes of transmit and receive FIFOs with programmable trigger levels
- Auto hardware and software flow control
- Automatic RS-485 support with driver direction control via RTS signal
- Built-in IrDA encoder and decoder interface
- Software reset capability
- Fully programmable character formatting (5-bit, 6-bit, 7-bit, or 8-bit characters; even, odd, or no parity; 1, 1.5, or 2 stop bits)
- Line break generation and detection
- Internal Loopback mode
- Industrial and commercial temperature ranges
Applications
- Factory automation and process control
- Portable and battery-operated devices
- Cellular data devices
- Handheld devices
- Industrial control systems
Q & A
- What is the SC16IS741AIPWJ?
The SC16IS741AIPWJ is a high-performance single-channel UART with an I2C-bus/SPI interface, designed for protocol conversion between I2C-bus/SPI and RS-232/RS-485 interfaces. - What are the operating voltages of the SC16IS741AIPWJ?
The device operates at 3.3 V or 2.5 V. - What is the maximum baud rate of the SC16IS741AIPWJ?
The maximum baud rate is up to 5 Mbit/s in 16× clock mode. - Does the SC16IS741AIPWJ support RS-485?
Yes, it supports automatic RS-485 with driver direction control via the RTS signal. - What is the package type of the SC16IS741AIPWJ?
The device comes in a TSSOP16 package. - Is the SC16IS741AIPWJ compatible with other UARTs?
Yes, it is fully compatible with the industrial standard 16C450 and equivalent UARTs. - What are the flow control options available on the SC16IS741AIPWJ?
The device supports auto hardware flow control using RTS/CTS and auto software flow control with programmable Xon/Xoff characters. - Does the SC16IS741AIPWJ have built-in IrDA support?
Yes, it includes a built-in IrDA encoder and decoder interface. - Can the SC16IS741AIPWJ be reset via software?
Yes, the device supports software reset. - What are the typical applications of the SC16IS741AIPWJ?
It is used in factory automation, portable and battery-operated devices, cellular data devices, and industrial control systems.