Overview
The S9KEAZN32AVLCR is a microcontroller from NXP Semiconductors, part of the KEA family. This device is designed for a wide range of applications, particularly in automotive, industrial, and IoT sectors. It features an Arm® Cortex-M0+ core, making it a high-performance and efficient solution for various embedded systems.
Key Specifications
| Parameter | Value |
|---|---|
| Voltage Range | 2.7 to 5.5 V |
| Core | Arm® Cortex-M0+ |
| Maximum Clock Speed | Up to 48 MHz |
| Flash Memory | Up to 32 KB |
| RAM | Up to 4 KB |
| Temperature Range | -40 to 125°C |
| Package Options | 32-pin LQFP |
| Analog Modules | One up to 16-channel 12-bit SAR ADC, two analog comparators |
| Communication Interfaces | Two SPI modules, up to three UART modules, two I2C modules, one MSCAN module |
| Timers | One 6-channel FlexTimer/PWM, two 2-channel FlexTimer/PWM, one PIT, one PWT, one RTC |
Key Features
- Arm® Cortex-M0+ core with up to 48 MHz clock speed
- Single cycle 32-bit x 32-bit multiplier and single cycle I/O access port
- Power management module (PMC) with three power modes: Run, Wait, Stop
- Low-voltage detection (LVD) with reset or interrupt, selectable trip points
- Watchdog with independent clock source (WDOG)
- Programmable cyclic redundancy check module (CRC)
- Serial wire debug interface (SWD) and aliased SRAM bitband region (BIT-BAND)
- Bit manipulation engine (BME)
- Up to 71 general-purpose input/output (GPIO) and two 32-bit keyboard interrupt modules (KBI)
Applications
The S9KEAZN32AVLCR is suitable for a variety of applications, including:
- Automotive systems: powertrain, body control, and safety systems
- Industrial control systems: motor control, sensor nodes, and automation
- IoT devices: smart sensors, flow meters, and other battery-constrained devices
Q & A
- What is the core type of the S9KEAZN32AVLCR?
The S9KEAZN32AVLCR features an Arm® Cortex-M0+ core. - What is the maximum clock speed of the S9KEAZN32AVLCR?
The maximum clock speed is up to 48 MHz. - What is the voltage range of the S9KEAZN32AVLCR?
The voltage range is 2.7 to 5.5 V. - How much flash memory does the S9KEAZN32AVLCR have?
The S9KEAZN32AVLCR has up to 32 KB of flash memory. - What are the package options for the S9KEAZN32AVLCR?
The S9KEAZN32AVLCR is available in a 32-pin LQFP package. - Does the S9KEAZN32AVLCR support low-voltage detection?
Yes, it supports low-voltage detection (LVD) with reset or interrupt, and selectable trip points. - What communication interfaces are available on the S9KEAZN32AVLCR?
The device includes two SPI modules, up to three UART modules, two I2C modules, and one MSCAN module. - What are the key analog modules of the S9KEAZN32AVLCR?
The device features one up to 16-channel 12-bit SAR ADC and two analog comparators. - Is the S9KEAZN32AVLCR suitable for automotive applications?
Yes, it is designed for use in automotive systems, including powertrain, body control, and safety systems. - What is the temperature range of the S9KEAZN32AVLCR?
The temperature range is -40 to 125°C.
