Overview
The PTN36241GHXZ is a SuperSpeed USB 3.0 redriver integrated circuit (IC) produced by NXP USA Inc. This device is designed to enhance signal quality in USB 3.0 applications by performing receive equalization and transmit de-emphasis. It is particularly suited for mobile and other high-speed data transfer environments, such as smartphones, tablets, notebooks, hubs, and A/V display devices. The PTN36241GHXZ operates at a data signaling rate of 5 Gbit/s per channel and is known for its low power consumption and advanced power management capabilities.
Key Specifications
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 1.8 | V |
| Operating Temperature Range | -40 to +85 | °C |
| Package Type | X2QFN12 | |
| Package Dimensions | 1.25 mm x 2.1 mm x 0.35 mm | |
| Pin Pitch | 0.4 mm | |
| Data Signaling Rate per Channel | 5 Gbit/s | |
| Active Power Consumption (Typical) | 189 mW / 105 mA | |
| Power-Saving State Current (Typical) | 1 mA | |
| Deep Power-Saving State Current (Typical) | 2 μA | |
| Start-Up Time | 6 ms (Typical) |
Key Features
- Supports USB 3.0 SuperSpeed specification
- Dual-channel operation with each channel consisting of high-speed Transmit (Tx) and Receive (Rx) differential lanes
- Receive equalization and transmit de-emphasis to recover from InterSymbol Interference (ISI) and high-frequency losses
- Output swing adjustment and integrated termination resistors for impedance matching
- Automatic receiver termination detection
- Advanced power management with support for USB 3.0 Low-power modes (U2/U3)
- Ternary control IO logic on C1 and C2 control pins for flexible configuration
Applications
The PTN36241GHXZ is designed for use in various high-speed USB 3.0 applications, including:
- Mobile devices such as smartphones and tablets
- Notebooks and laptops
- USB hubs and docking stations
- A/V display devices and peripherals
Q & A
- What is the primary function of the PTN36241GHXZ?
The primary function of the PTN36241GHXZ is to enhance signal quality in USB 3.0 applications by performing receive equalization and transmit de-emphasis. - What is the data signaling rate supported by the PTN36241GHXZ?
The PTN36241GHXZ supports a data signaling rate of 5 Gbit/s per channel. - What is the operating temperature range of the PTN36241GHXZ?
The operating temperature range is -40 to +85 °C. - What type of package does the PTN36241GHXZ come in?
The PTN36241GHXZ comes in an X2QFN12 package. - How does the PTN36241GHXZ manage power consumption?
The PTN36241GHXZ has advanced power management capabilities, including support for USB 3.0 Low-power modes (U2/U3) and dynamic activation/de-activation of internal circuitry. - What are the typical power consumption values for the PTN36241GHXZ?
The typical active power consumption is 189 mW / 105 mA, and in deep power-saving state, it is 2 μA. - What are the key features of the PTN36241GHXZ's signal conditioning?
The key features include receive equalization, transmit de-emphasis, output swing adjustment, and integrated termination resistors. - How does the PTN36241GHXZ configure its signal conditions?
The PTN36241GHXZ uses ternary control IO logic on C1 and C2 control pins to configure its signal conditions. - What are some common applications of the PTN36241GHXZ?
Common applications include mobile devices, notebooks, USB hubs, and A/V display devices. - What is the start-up time of the PTN36241GHXZ?
The start-up time is typically 6 ms.
