Overview
The MKE06Z128VLD4 is a microcontroller from the Kinetis KE06 family, produced by NXP USA Inc. This MCU is designed to provide a next-generation solution with enhanced ESD/EMC performance, making it suitable for cost-sensitive, high-reliability device applications, particularly in high electrical noise environments.
Key Specifications
| Parameter | Description |
|---|---|
| Core | Arm® Cortex-M0+ |
| Operating Voltage | 2.7 to 5.5 V |
| Flash Memory | Up to 128 KB |
| RAM | Up to 16 KB |
| Maximum CPU Frequency | Up to 48 MHz |
| Temperature Range | -40 to 105°C |
| Package Type | 44-pin LQFP (10 mm x 10 mm) |
| Clock Source | Internal FLL with internal or external reference, 37.5 kHz pre-trimmed internal reference for 48 MHz system clock |
| Analog Modules | Up to 16-channel 12-bit SAR ADC, two analog comparators with 6-bit DAC |
| Communication Interfaces | Two SPI modules, up to three UART modules, two I2C modules, one MSCAN module |
Key Features
- Single cycle 32-bit x 32-bit multiplier and single cycle I/O access port
- Power management module (PMC) with three power modes: Run, Wait, Stop
- Low-voltage detection (LVD) with reset or interrupt, selectable trip points
- Watchdog with independent clock source (WDOG)
- Programmable cyclic redundancy check module (CRC)
- Serial wire debug interface (SWD) and bit manipulation engine (BME)
- Up to 71 general-purpose input/output (GPIO) and two 32-bit keyboard interrupt modules (KBI)
- Timers include one 6-channel FlexTimer/PWM, two 2-channel FlexTimer/PWM, one 2-channel periodic interrupt timer (PIT), one pulse width timer (PWT), and one real-time clock (RTC)
Applications
The MKE06Z128VLD4 is suitable for a variety of applications requiring high reliability and robust performance in noisy environments. These include industrial control systems, automotive electronics, consumer electronics, and medical devices. Its enhanced ESD/EMC performance makes it particularly useful in environments with high electrical noise.
Q & A
- What is the core type of the MKE06Z128VLD4?
The core type is Arm® Cortex-M0+. - What is the operating voltage range of the MKE06Z128VLD4?
The operating voltage range is 2.7 to 5.5 V. - How much flash memory does the MKE06Z128VLD4 have?
The MKE06Z128VLD4 has up to 128 KB of flash memory. - What is the maximum CPU frequency of the MKE06Z128VLD4?
The maximum CPU frequency is up to 48 MHz. - What are the package options for the MKE06Z128VLD4?
The MKE06Z128VLD4 is available in a 44-pin LQFP (10 mm x 10 mm) package. - Does the MKE06Z128VLD4 support analog modules?
Yes, it supports up to a 16-channel 12-bit SAR ADC and two analog comparators with a 6-bit DAC. - What communication interfaces are available on the MKE06Z128VLD4?
The MCU includes two SPI modules, up to three UART modules, two I2C modules, and one MSCAN module. - What are the power management features of the MKE06Z128VLD4?
The MCU features a power management module (PMC) with three power modes: Run, Wait, Stop, and low-voltage detection (LVD) with reset or interrupt. - Is the MKE06Z128VLD4 suitable for high-reliability applications?
Yes, it is designed for cost-sensitive, high-reliability device applications, especially in high electrical noise environments. - What are some typical applications for the MKE06Z128VLD4?
Typical applications include industrial control systems, automotive electronics, consumer electronics, and medical devices.
