Overview
The MC9S08PL16CTG is an 8-bit microcontroller from NXP USA Inc., part of the HCS08 family. This microcontroller is designed for low-cost, high-performance applications. It features an 8-bit S08 central processing unit (CPU) that operates up to 20 MHz across a voltage range of 2.7 V to 5.5 V and a temperature range of -40 °C to 85 °C. The device is equipped with various peripherals and power-saving modes, making it suitable for a wide range of embedded systems.
Key Specifications
| Specification | Details |
|---|---|
| CPU | 8-bit S08 central processor unit (CPU), up to 20 MHz |
| Memory | Up to 16 KB flash, 256 byte EEPROM, 2048 byte RAM |
| Power Supply | 2.7 V to 5.5 V |
| Temperature Range | -40 °C to 85 °C |
| Interrupts | Up to 40 interrupt/reset sources, four-level nested interrupt |
| Peripherals | IIC module, MTIM, RTC, SCI (UART), 10-bit ADC, Analog comparator |
| GPIO | Up to 37 GPIOs including one output-only pin |
| Package Options | 44-pin LQFP, 32-pin LQFP, 20-pin TSSOP, 16-pin TSSOP |
| Power Modes | Run mode, Wait mode, Stop3 mode |
Key Features
- 8-bit S08 CPU: Operates up to 20 MHz with support for up to 40 interrupt/reset sources and four-level nested interrupts.
- Memory: Includes up to 16 KB flash, 256 byte EEPROM, and 2048 byte RAM.
- Peripherals: Features IIC module, modulo timers (MTIM), real-time counter (RTC), serial communication interface (SCI/UART), 10-bit ADC, and analog comparator.
- Power Management: Offers power-saving modes including low-power stop mode and reduced power wait mode.
- GPIO and I/O: Up to 37 GPIOs, including one output-only pin and two true open-drain output pins.
- Development Support: Single-wire background debug interface and on-chip in-circuit emulator (ICE) debug module.
Applications
The MC9S08PL16CTG is versatile and can be used in various applications such as industrial control systems, automotive systems, consumer electronics, and medical devices. Its power-saving features and robust peripheral set make it ideal for battery-powered devices and systems requiring low power consumption.
Q & A
- What is the maximum operating frequency of the MC9S08PL16CTG?
The MC9S08PL16CTG operates up to 20 MHz. - What are the memory options available on this microcontroller?
The device includes up to 16 KB flash, 256 byte EEPROM, and 2048 byte RAM. - What are the power supply voltage and temperature ranges for this microcontroller?
The power supply voltage range is 2.7 V to 5.5 V, and the temperature range is -40 °C to 85 °C. - What peripherals are available on the MC9S08PL16CTG?
The device features IIC module, MTIM, RTC, SCI (UART), 10-bit ADC, and analog comparator. - How many GPIOs are available on this microcontroller?
Up to 37 GPIOs are available, including one output-only pin. - What power-saving modes are supported by the MC9S08PL16CTG?
The device supports run mode, wait mode, and stop3 mode. - Is the MC9S08PL16CTG compliant with environmental regulations?
Yes, it is compliant with EU Directives RoHS, ELV, and China RoHS. - What are the package options for the MC9S08PL16CTG?
The device is available in 44-pin LQFP, 32-pin LQFP, 20-pin TSSOP, and 16-pin TSSOP packages. - Does the MC9S08PL16CTG support in-circuit debugging?
Yes, it supports single-wire background debug interface and on-chip in-circuit emulator (ICE) debug module. - What are some typical applications for the MC9S08PL16CTG?
It is used in industrial control systems, automotive systems, consumer electronics, and medical devices.
