Overview
The HMC1190ALP6NETR is a high linearity broadband dual channel downconverting mixer with an integrated PLL (Phase-Locked Loop) and VCO (Voltage-Controlled Oscillator), designed by Analog Devices Inc. This component is optimized for multi-standard receiver applications, particularly in cellular and wireless communication systems. It features a compact 6x6 mm leadless QFN package, making it suitable for space-constrained designs. The mixer supports a wide RF bandwidth of 700 MHz to 3800 MHz, catering to various cellular standards including GSM, 3G, LTE, WiMAX, and 4G.
Key Specifications
| Parameter | Value |
|---|---|
| RF Frequency Range | 700 MHz to 3800 MHz |
| Number of Mixers | 2 |
| Input IP3 | +24 dBm |
| Power Conversion Gain | 8.9 dB |
| Input P1dB | 11 dBm |
| SSB Noise Figure | 9 dB |
| Channel-to-Channel Isolation | 55 dBc |
| Maximum Phase Detector Rate | 100 MHz |
| Phase Noise | -110 dBc/Hz in band |
| Integrated RMS Jitter | < 180 fs (1 kHz to 20 MHz) |
| LO Low Noise Floor | -165 dBc/Hz |
| Mixer Low Noise Floor | -161 dBc/Hz |
| Package Type | 6x6 mm Leadless QFN |
Key Features
- Broadband operation with no external matching required.
- High-side and low-side LO injection capability.
- Integrated wideband limiting LO amplifiers.
- Enable/Disable mixer and PLL/VCO independently.
- Single-ended RF input ports.
- Compact RoHS compliant package.
- Programmable RF output phase and synchronous frequency changes.
- LO output mute function.
Applications
- Multiband/Multi-standard Cellular Base Stations (BTS) and Diversity Receivers.
- GSM, 3G, LTE, WiMAX, and 4G systems.
- MIMO Infrastructure Receivers.
- Wideband Radio Receivers.
- Multiband Basestations and Repeaters.
Q & A
- What is the RF frequency range of the HMC1190ALP6NETR? The RF frequency range is from 700 MHz to 3800 MHz.
- How many mixers are integrated in the HMC1190ALP6NETR? There are two mixers integrated in this component.
- What is the input IP3 of the HMC1190ALP6NETR? The input IP3 is +24 dBm.
- What is the power conversion gain of the HMC1190ALP6NETR? The power conversion gain is 8.9 dB.
- What is the SSB noise figure of the HMC1190ALP6NETR? The SSB noise figure is 9 dB.
- Can the mixer and PLL/VCO be enabled/disabled independently? Yes, the mixer and PLL/VCO can be enabled/disabled independently.
- What is the maximum phase detector rate of the HMC1190ALP6NETR? The maximum phase detector rate is 100 MHz.
- What is the phase noise of the HMC1190ALP6NETR? The phase noise is -110 dBc/Hz in band.
- What is the integrated RMS jitter of the HMC1190ALP6NETR? The integrated RMS jitter is less than 180 fs (1 kHz to 20 MHz).
- Is the HMC1190ALP6NETR RoHS compliant? Yes, the HMC1190ALP6NETR is RoHS compliant.
