Overview
The ADIN1300CCPZ-R7 is a low power, single port, Gigabit Ethernet transceiver designed by Analog Devices Inc. It is optimized for industrial Ethernet applications, offering low latency and power consumption. This device integrates an energy-efficient Ethernet (EEE) physical layer device (PHY) core along with associated analog circuitry, clock buffering, management interfaces, and MAC interface and control logic. The ADIN1300CCPZ-R7 is housed in a 40-lead, 6 mm × 6 mm LFCSP package and operates over a wide temperature range of -40°C to +105°C, making it suitable for various industrial environments.
Key Specifications
| Attribute | Value |
|---|---|
| Manufacturer | Analog Devices Inc. |
| Part Number | ADIN1300CCPZ-R7 |
| Package | 40-lead LFCSP (6mm x 6mm x 0.75mm w/ EP) |
| Temperature Range | -40°C to +105°C |
| Compliance | 10BASE-Te/100BASE-TX/1000BASE-T IEEE 802.3 |
| MAC Interfaces | MII, RMII, RGMII |
| Latency (1000BASE-T) | Transmit <68 ns, Receive <226 ns |
| Latency (100BASE-TX) | Transmit <52 ns, Receive <248 ns |
| Power Consumption | 330 mW for 1000BASE-T, 140 mW for 100BASE-TX |
| VDDIO Supply | 1.8 V, 2.5 V, or 3.3 V |
| EMC Standards | IEC 61000-4-5 surge (±4 kV), IEC 61000-4-4 EFT (±4 kV), IEC 61000-4-2 ESD (±6 kV contact discharge) |
Key Features
- Low power consumption and low latency, making it suitable for industrial Ethernet applications.
- Supports Time Sensitive Networking (TSN) with programmable RGMII timing delay and drive current.
- Unmanaged configuration using multilevel pin strapping.
- MDIO/MDC management interface and interrupt pin.
- Energy Efficient Ethernet (EEE) in accordance with IEEE 802.3az.
- Start of packet detection for IEEE 1588 time stamp support and enhanced link detection.
- Voltage mode MDI drivers, eliminating termination resistors, and RJ45 MDI flip capability.
- Automatic polarity and pair swap correction, along with cable diagnostics (TDR and signal analysis).
- Frame generator and checker, multiple loopback modes, and configurable LED.
- Brown-out protection and integrated power supply monitoring with power-on reset (POR) circuit.
Applications
- Industrial automation.
- Process control.
- Factory automation.
- Robotics and motion control.
- Time sensitive networking (TSN).
- Building automation.
- Test and measurement.
- Industrial Internet of Things (IoT).
Q & A
- What is the ADIN1300CCPZ-R7 primarily designed for?
The ADIN1300CCPZ-R7 is primarily designed for industrial Ethernet applications, offering low power consumption and low latency.
- What are the supported MAC interfaces for the ADIN1300CCPZ-R7?
The ADIN1300CCPZ-R7 supports MII, RMII, and RGMII MAC interfaces.
- What is the temperature range of the ADIN1300CCPZ-R7?
The device operates over a temperature range of -40°C to +105°C.
- Does the ADIN1300CCPZ-R7 support Time Sensitive Networking (TSN)?
- What power consumption can be expected for 1000BASE-T and 100BASE-TX operations?
The power consumption is 330 mW for 1000BASE-T and 140 mW for 100BASE-TX.
- What are the key EMC standards the ADIN1300CCPZ-R7 complies with?
The device complies with IEC 61000-4-5 surge (±4 kV), IEC 61000-4-4 EFT (±4 kV), and IEC 61000-4-2 ESD (±6 kV contact discharge).
- Does the ADIN1300CCPZ-R7 have built-in cable diagnostics?
- What is the package type and size of the ADIN1300CCPZ-R7?
The device is packaged in a 40-lead LFCSP (6mm x 6mm x 0.75mm w/ EP).
- Does the ADIN1300CCPZ-R7 support IEEE 1588 time stamping?
- What is the purpose of the brown-out protection in the ADIN1300CCPZ-R7?
The brown-out protection monitors the power supplies and holds the device in hardware reset if any supply drops below a minimum threshold, ensuring stable operation.
