Overview
The ADA4096-4ACPZ-R7 is a quad micropower operational amplifier from Analog Devices, designed for low-power applications in various environments, including industrial and automotive settings. This device features rail-to-rail input and output swing, making it versatile for systems with varying power supply voltages. The ADA4096-4ACPZ-R7 is part of the ADA4096 series, known for its low power consumption and high performance, making it suitable for battery-powered and solar-powered systems.
Key Specifications
| Parameter | Value |
|---|---|
| Number of Channels | 4 Channel |
| GBP - Gain Bandwidth Product | 786 kHz |
| SR - Slew Rate | 300 mV/us |
| Vos - Input Offset Voltage | 35 uV |
| Ib - Input Bias Current | 10 nA |
| Supply Voltage - Max | 30 V, +/- 15 V |
| Supply Voltage - Min | 3 V, +/- 1.5 V |
| Operating Supply Current | 240 uA |
| Output Current per Channel | 10 mA |
| CMRR - Common Mode Rejection Ratio | 95 dB |
| en - Input Voltage Noise Density | 27 nV/sqrt Hz |
| Package / Case | LFCSP-16 |
| Mounting Style | SMD/SMT |
| Shutdown | No Shutdown |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +125°C |
| Output Type | Rail-to-Rail |
| PSRR - Power Supply Rejection Ratio | 100 dB |
Key Features
- Rail-to-rail input and output swing for flexible system design
- Low power consumption (typically 1.5mA per amplifier)
- Wide operating temperature range (-40°C to 125°C)
- High common-mode rejection ratio (CMRR) for reduced noise
- Input overvoltage protection up to 32 V above or below the supply rails
- No phase inversion over the entire common-mode voltage range
- Capacitive loads up to 200 pF handled without oscillation
Applications
The ADA4096-4ACPZ-R7 is suitable for various applications where low power consumption and high performance are critical, such as:
- Industrial control systems
- Automotive electronics
- Medical devices
- Consumer electronics
- Battery-powered devices
- Solar-powered systems
- Low-power industrial control systems
Q & A
- What is the ADA4096-4ACPZ-R7?
The ADA4096-4ACPZ-R7 is a quad micropower operational amplifier from Analog Devices.
- What are the key features of the ADA4096-4ACPZ-R7?
Key features include rail-to-rail input and output swing, low power consumption, wide operating temperature range, and high CMRR.
- What is the operating temperature range of the ADA4096-4ACPZ-R7?
The operating temperature range is -40°C to 125°C.
- What is the maximum supply voltage for the ADA4096-4ACPZ-R7?
The maximum supply voltage is 30 V or +/- 15 V.
- Does the ADA4096-4ACPZ-R7 have input overvoltage protection?
Yes, it has input overvoltage protection up to 32 V above or below the supply rails.
- What is the typical operating supply current per channel?
The typical operating supply current per channel is 60 uA.
- What type of package does the ADA4096-4ACPZ-R7 come in?
The ADA4096-4ACPZ-R7 comes in a 16-pin LFCSP package.
- Is the ADA4096-4ACPZ-R7 suitable for automotive applications?
While the ADA4096-4ACPZ-R7 can be used in automotive environments, specific automotive-grade models like the ADA4096-2W should be considered for strict automotive requirements.
- What are some common applications for the ADA4096-4ACPZ-R7?
Common applications include industrial control systems, automotive electronics, medical devices, and consumer electronics.
- How do I connect the ADA4096-4ACPZ-R7 in a typical system?
Connect the VCC pin to a power supply, GND pin to ground, apply input signals to the IN+ and IN- pins, and observe the output signal at the VOUT+ and VOUT- pins. Refer to the datasheet for detailed connections and usage guide.
